541360
34
Zoom out
Zoom in
Previous page
1/60
Next page
34 ML5000 User Guide
H ROTARY AUX 1-8 MASTERS
These are the masters for the channel post-fade
aux sends 1-8. They are normally used as sends to
effects processors such as reverb. Note that the
channel send rotaries B2 are dual element
controls that simultaneously send the post-fade
signal to these rotary masters and the pre or post-
fade signal to the fader masters F .
H1 MASTER LEVEL. Adjusts the master output
level from fully off to a maximum boost of +6dB.
The normal ‘0’ position is marked.
H2 AFL. Press this switch to listen to the master
signal in the headphones or engineers monitor
without affecting the main outputs. The signal is
monitored post-level so that the signal feeding the
connected equipment can be checked. The same
capabilities apply as described previously for the
grp/aux masters F .
Configuring Groups and Auxes
Decide the application of the console whether front-
of-house or monitor. Decide the number of audio
groups required. The rest can be configured as
fader controlled auxes.
Front-of-House. This is the application with all
mode switches in their default up position. This
provides 8 audio groups with individual routing
switches and LCRplus™ sub grouping, 8 post-fade
auxes on rotary masters for effects sends, and a
further 8 auxes on faders for monitors and special
feeds. The groups can be mixed to the 8 matrix
outputs. If you do not need all 8 groups then you
can press the mode switches to configure more
fader controlled aux sends.
Stage Monitor. Press mode switches to configure
the engineers wedge monitor and the number of
fader controlled mixes you need up to a maximum
of 16. The rest can be used for effects sends. Up
to 4 stereo mixes can be configured, ideal for in-ear
monitoring. Each mix provides an insert for
patching in an equaliser or other signal processing,
full metering, mono or stereo AFL, and talkback
enable. The rotary master outputs would not
normally be used when the fader masters are
configured as monitor sends.
1
OO +6
AUX
AFL
POST-FADE
AFL
2
OO +6
AUX
POST-FADE
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML-5000 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info