541363
32
Zoom out
Zoom in
Previous page
1/48
Next page
32 ML3000 User Guide
MAIN MIX MASTERS
WEDGE MODE. This underpanel mode switch
configures the C output to become the engineers
monitor when the console is used for the stage
monitor application. When pressed the monitor
source is routed in mono through the C insert and
fader to the main output. The C mix bypasses this
section and is available from the matrix outputs if
needed. The switch is protected to prevent
accidental operation. Use a pen or pointed
implement to select the required mode.
IDENT STRIP. Identifies the masters and provides
a write-on area. The use of low adhesion artist or
masking tape is recommended.
FADER MASTERS The main mix L,R and C each
have a 100mm smooth travel ALPS fader providing
+10dB gain above the nominal 0dB operating
position. These faders are not part of the console
VCA group system and pass audio in the
conventional way.
Using the Engineers Wedge Monitor
It is best to use the same type of monitor speaker
as provided on stage. This lets the engineer hear
the sound as the performer hears it.
Select the underpanel WEDGE MODE switch to
configure the C output as the engineers wedge
monitor. Use the insert to patch in any processing
required, for example an EQ to preview changes in
the monitor before applying them to the mix being
checked.
Select LR, C, 2-TRK or none as the default monitor
source. Pressing AFL overrides the source to listen
to a selected output. Pressing PFL overrides any
AFL selection to check one or more inputs.
Releasing PFL restores the previously selected
AFL. This is well suited to monitor mixing where
you need to listen to the mixes in turn but quickly
check individual inputs along the way.
Pressing the TALK TO TB switch automatically
dims the output by 20dB to prevent feedback
between the local speaker and talkback mic.
OO
5
0
10
5
30
40
10
20
OO
5
0
10
5
30
40
10
20
LISTEN WEDGE
C MAIN MIX
DUMP
WEDGE
mode
L R C /WEDGE
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info