541363
31
Zoom out
Zoom in
Previous page
1/48
Next page
ML3000 User Guide 31
FADER MASTER A 60mm smooth travel fader is
fitted providing +10dB gain above the nominal 0dB
operating position. These faders control the output
level of Group/Aux 1-4 and Aux 5-8. They are not
part of the console VCA group system.
TB ENABLE Press these switches to enable
talkback to any combination of grp/aux master
outputs. When selected, pressing the TALK TO TB
switch routes the talkback mic signal, or pressing
the OSC/NOISE TO TB switch routes the
oscillator/noise generator signal to the output.
When not selected, pressing these switches does
not affect the output. The talkback and osc/noise
signals are routed pre-insert.
MUTE Switches the grp/aux master signal on or
off. The switch illuminates when the signal is
muted. It is not part of the console automation and
mute group system.
Configuring Groups and Auxes
Decide the application of the console whether front-
of-house or monitor or doing both jobs. Decide the
number of audio groups required. The rest can be
configured as fader controlled auxes.
Front-of-House. This is the application with all
mode switches in their default up position. This
provides 4 audio groups with paired routing
switches and LCRplus™ sub grouping, 4 auxes
switchable pre or post-fader on rotary masters for
effects, and a further 4 auxes on faders for more
effects, monitors and special feeds. Two of these
can be configured as a stereo send. The groups
can be mixed to the 4 matrix outputs. If you do not
need fader control or inserts on all 4 groups then
you can press the mode switches to configure fader
controlled aux sends with inserts.
Stage Monitor. Press mode switches to configure
the C fader as the engineers wedge monitor, and to
configure the number of fader controlled monitor
mixes you need up to a maximum of 8. The rest
can be used for effects sends. A stereo mix can be
configured, for example when in-ear monitor mixing.
Each mix provides an insert for patching in an
equaliser or other signal processing, full metering,
AFL, and talkback enable. The groups are
available on the rotary masters if required. LR
could be used for sidefills or an additional stereo
monitor if you are mixing pre-fader.
The diagram below shows how the fader master
section together with its insert point reverses with
the rotary master section when the mode switch is
pressed. The Aux and Group output XLR
connectors do not reverse. The matrix and sub
grouping is always fed from the group signal
regardless of mode.
OO
AFL
+6
LEV
AFL
MUTE
TB
MONITOR
FOH
mode
3
2
1
MATRIX
INSERT
SUBGROUP
GROUP MIX
GROUP OUT
AUX MIX
AUX OUT
4
MIX
BLEND
PAN
AUDIO GROUP MASTERS
AUX 1-4 MASTERS
REVERSEREVERSE
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info