541363
30
Zoom out
Zoom in
Previous page
1/48
Next page
30 ML3000 User Guide
GROUP / AUX 1-4 and AUX 5-8 MASTERS
GRP/AUX REVERSE MODE This switch reverses
the group fader and aux rotary master sections. It
is underpanel to protect it from accidental operation.
Use a pen or pointed implement to select the
required setting. The default up position is flush
with the panel.
In the up position FOH MODE is selected. This is
the default setting for the front-of-house application.
In FOH mode the fader master section and insert
are associated with the audio group while the rotary
master is associated with the aux send.
In the pressed position MONITOR MODE is
selected. This reverses the fader and rotary master
so that the fader master section and insert are
associated with the aux send while the rotary
master is associated with the group. The group
always feeds the matrix and sub grouping to main
mix regardless of mode.
AUX ROTARY MASTER Adjusts the aux master
output level from fully off to a maximum boost of
+6dB. The normal ‘0’ position is marked. This
becomes the group master when MONITOR mode
is configured.
AFL Press this switch to listen to the master signal
in the headphones or engineers monitor without
affecting the main outputs. The signal is monitored
post-level so that the signal feeding the connected
equipment can be checked.
MAIN MIX A single switch routes each audio group
1-4 signal to the 3 output main mix. Select this to
create up to 4 subgroups to the main mix. Its
balance and image within the L, R and C outputs is
determined by the BLEND and PAN controls. The
group always feeds this sub grouping to main mix
regardless of mode.
BLEND This control adjusts the balance between
the LR and C outputs. Fully anti-clockwise all the
signal routes to the LR outputs and none to C. At
the detented centre position the signal routes
equally to the LR and C outputs. Fully clockwise all
signal routes to the C output and none to LR. The
control has a 3dB attenuation at centre position.
PAN Adjusts the balance between the L and R
outputs. It does not affect the C output. At the
detented centre position the signal routes equally to
L and R. PAN and BLEND combine to adjust the
balance between the 3 outputs. The control has a
3dB attenuation at centre position.
OO +6
AFL AFL
OO +6
GRP/AUX
LR
=
PAN
LR C
=
LCR
BLEND
+
MAIN
MIX MIX
MAIN
+
BLEND
LCR
=
CLR
PAN
=
RL
AFL
reverse reverse
AFL
MUTE MUTE
TB TB
GRP/AUX
0
OO
30
10
20
5
5
10
0
OO
30
10
20
5
5
10
LEVLEV
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info