541378

Allen-Heath MixWizard Series WZ20S Manual

22
Zoom out
Zoom in
Previous page
1/32
Next page
22 WZ20S User Guide
Master Section
POWER ON Green LED lights when the console is powered.
HEADPHONES 1 OUTPUT Two outputs are available for stereo
headphones, one on the front panel, the other on the rear panel. This
is convenient when two headphones are required at the same time, for
example presenter and guest in a broadcast application. The same
signal is available from both. Headphones are available in many
different styles, impedances and volume ratings. To get the best from
your system we recommend that you use high quality closed ear
headphones in the range 30 to 600 ohms. 8 Ohm headphones are not
recommended.
WARNING Some headphones are more sensitive than
others and can produce higher output levels. To avoid damage
to your hearing start with the PHONES level control at minimum
and turn up only as much as is needed to maintain comfortable
listening level. Do not drive headphones at high listening levels
for long periods of time.
EXTERNAL INPUTS Two external inputs are provided in
addition to the mono and stereo channels. Each has a pair of TRS
jacks to accept a line level stereo source. For mono sources plug into
the L jack only leaving the R jack unplugged.
MIX1(2) ROUTING SWITCHES These underpanel tamperproof
switches determine how the external inputs are to be used. There are
two main applications:
Mix Inputs To connect additional stereo or mono sources to either or
both MIX1 and MIX2. For example, you could use these to return the
processed output from effects devices such as reverb, to accept an
input from a submixer, or for 2-track replay into the mix. EXT1 can
route to either or both MIX1 and MIX2. EXT2 can route to MIX2 only.
This would give you a dedicated effects return to each mix, or one
return routed to both. The pre-level signal feeds the monitor source
selector. Use a pointed object such as a pen to select MIX1 and/or
MIX2 routing switches as required.
Monitor Inputs To return sources to the monitor selector for
monitoring only. With both switches in the up position the signal feeds
the monitor source selector and is not affected by the level control.
This is the case when the input is used for monitoring only and should
not feed the main mix, for example checking a stereo recording or an
off-air broadcast signal. The tamperproof underpanel routing switches
prevent accidental operation. If the switch were accidentally pressed
the signal would route back on itself and cause feedback. Decide the
application of these inputs and set the switches accordingly.
EXT1(2) IN The rotary controls adjust the level of the external inputs
when routed to MIX1 or MIX2 or both as selected on the routing
switches above. Note that these do not affect the feeds to the monitor
selector. Operating level is –10dBV as standard but may be changed to
+4dBu by resoldering an internal link.
MIX2MIX1
OO OO
20
30 30
20
0 0
5
10 10
5
10
5 5
10
010
EXT1
DIM
6
1
EXT2
MIX1
PFL
5
0
MIX2
MONO
1
3
4
2
OO
O
AUX
6
O
+4
SPLIT
PFL ENABLE
+4
0
MONITOR
9
7
8
LOCAL
ALL UP =
MIX2
AUX1
AUX3
AUX2
AUX5
AUX4
AUX6
O
AUX
5
O
O
4
AUX
O
+4
5-6
6
+4
4
5
O
AUX
3
O
O
AUX
O
2
2
+4
3
3-4
+4
0
1-2
1
-3-3
MONITOR
6
R
AUX
1
5
0
4
2
1
3
MIX1
RL
PFL
L
-12-12
-30
-20
-16
-20
-30
-16
-6
-9 -9
-6
LEV
8
9
7
PRG
MIX2
0
+3
+6
+3
0
+6
+16
+9
PFL
+9
+16
OO
IN
EXT1
0
+6 OO
MIX2
IN
EXT2
SPLIT PFL
0
+6
POWER ON
MIX1
0
0
0
0
1
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard Series WZ20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard Series WZ20S in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info