541378

Allen-Heath MixWizard Series WZ20S Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
30 WZ20S User Guide
Options
The WZ20S is designed to offer the utmost flexibility to satisfy your application without
modification. However, the following internal options are provided to allow customisation
to satisfy the more specialist applications. This work requires access to the internal
assemblies and resoldering of circuit card links and should be carried out by competent
technical personnel only. Further information and details are printed in the WZ20S
Service Manual, available from your service agent, or by contacting ALLEN & HEATH
technical support.
Internal Configuration Link Options
Mono channel AUX options The pre-fade sends are set post-EQ, post-ON as
standard. Links on the mono circuit cards can be resoldered to reconfigure pre-
EQ and/or pre-ON as required.
Stereo channel AUX options The stereo channel aux sends sum the channel
left and right signals as standard. Links can be resoldered so that the left signal
feeds sends 1, 3, 5, and the right feeds 2, 4, 6. One pair of links affects all pre-
fade sends, another all post-fade.
Mono channel DIRECT outputs These are sourced post channel fader as
standard. A link on each card can be resoldered to reconfigure pre-fader. The
direct out pre-fade source is the same as that configured to feed the aux sends.
EXT input level option The external inputs are set for -10dBV line level as
standard. These can be reconfigured for +4dBu operation by cutting track links
on the connector card.
DIM switch function The DIM switch is set to mute the local monitor as
standard. This can be reconfigured to attenuate the signal by 20dB by cutting a
pair of track links on the right master circuit card.
Remote control of the DIM function The right master circuit card provides
solder pads to wire to the 25 pin REMOTE connector so local monitor DIM can
be activated by an external switch. Alternatively it can be wired to a mono card
so that pressing ON, PFL, or raising a switched fader can automatically mute
the signal. This can be used to mute the studio loudspeakers when the
presenter is on-air or checks his own microphone using PFL.
REMOTE user connector The blanking plate may be replaced with a standard
25 pin chassis mount female D-connector for custom wiring.
Internally Fitted Option Kits
SYS-LINK output The blanking plate can be replaced with a 25 pin D-
connector with circuit card. This provides access to all the console outputs and
is compatible with any ALLEN & HEATH console already fitted with the SYS-
LINK expander system.
RIAA option Up to three dual RIAA preamp circuit cards can be wired to the
connector assembly for direct connection to magnetic cartridge turntables. Each
card provides two stereo channels.
Switched fader option The standard mono and stereo faders can be
replaced by high grade Alps K-faders with fitted micro switches. These can be
wired to the 25 pin user connector to provide a remote start facility.
… 30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard Series WZ20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard Series WZ20S in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info