541378

Allen-Heath MixWizard Series WZ20S Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14 WZ20S User Guide
Connecting the Stereo Channel
B
L /
R
IN
M
A
R
L
IN
19-20
INPUT A This provides a pair of RCA phono sockets for connection to stereo sources
such as CD players, MiniDisc and record decks. The inputs are unbalanced and can
accept line levels signals from as low as –20dBu to a high +10dBu. The level is matched to
the console using the front panel GAIN A control. The signal can be mixed with Input B if
required by pressing both A and B ON switches together. An optional RIAA card may be
fitted internally for direct connection to a magnetic turntable cartridge. Refer to your
ALLEN & HEATH agent for details.
INPUT B This provides a pair of TRS jack sockets for connection to any line level
source. For stereo sources plug into both the L/M and R sockets. For mono sources plug
into just the L/M socket leaving the R socket unplugged. In this case the signal is
normalled through the R socket to the right channel. The inputs are balanced to provide
interference rejection when connecting to 3 wire balanced sources using long cables. The
socket automatically grounds the cold (-) input to accept unbalanced 2 wire TS jack
sources. To connect an unbalanced source using a TRS jack you should link ring to
sleeve in the plug as shown above. The inputs can accept line level signals from as low
as –20dBu to a high +10dBu. The level is matched to the console using the front panel
GAIN B control. The signal can be mixed with Input A if required by pressing both A and
B ON switches together.
Connecting the External Inputs
R
EXT IN
2
L
EXT IN 1 (2) This provides a pair of TRS jack sockets for connection to line level sources
such as effects, 2-track or monitor returns. A tamperproof front panel switch determines
whether the signal feeds MIX 1(2) or just the monitor select switch bank. For stereo
sources plug into both the L/M and R sockets. For mono sources plug into just the L
socket leaving the R socket unplugged. In this case the signal is normalled through the R
socket to the right channel. The inputs are balanced to provide interference rejection
when connecting to 3 wire balanced sources using long cables. The socket automatically
grounds the cold (-) input to accept unbalanced 2 wire TS jack sources. To connect an
unbalanced source using a TRS jack you should link ring to sleeve in the plug as shown
above. The operating level is –10dBV but may be set for +4dBu by changing an internal
link option.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard Series WZ20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard Series WZ20S in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info