541382
18
Zoom out
Zoom in
Previous page
1/47
Next page
18 IDR-8 User Guide
DR-8
AUDIO MIX PROCESSOR
REMOVE THESE SCREWS
PRESS AND HOLD FOR 2 SECONDS
The iDR-8 Setup Menus
*1 Patch Select Scroll through the available
patches and recall the one you want. This can be
useful for recalling test patches for system
checking without the need for connecting to a PC.
*2 Clock Change the time of the internal clock.
*3 Day of Week Change the day held in the
internal clock.
*4 Unit Name Give the unit a unique name so it
can be identified when connected to a PC or
network.
*5 Network Setup This must be done before
connecting the unit to a PC or network using
TCP/IP. You can select automatic address
allocation by a DHCP server, or enter the IP
address and Subnet Mask manually.
*6 PPP Setup This must be done before
communicating with a modem or PC via RS232
using a dial-up connection. Enter the host and
client addresses, username and password.
*7 Monitoring Lets you select any point in any
channel for monitoring using the headphones and
rear panel monitor output. It is a convenient way
to check the audio signals without the need for a
PC and without affecting the normal operation of
the unit.
*8 Diagnostics Provides useful setup and status
information.
PL-Anet Devs: nn
Audio Exp: None
Sampling: 48kHz
Num Connects: nn
*8.2 Net Mask 255.255.255.0
*8 Diagnostics
*8.1 IP Address 192.168.0.2
Fader
Sidechain
Gate
Compressor
Eq
Delay
*7.3 Point Source
scroll channel
*7.2 Channel Channel 1
Output channel
*7 Monitoring
*7.1 Ip/Op Input Channel
scroll character scroll character scroll character
*6.4 Password
A
&H
A
&HA&H
Max 16 characters
scroll character scroll character
*6.3 Username
i
DR iDR
Max 16 characters
scroll numbers scroll numbers scroll numbers scroll numbers
*6.2 Client IP
192
.168.0.2 192.168.0.2 192.168.0.2 192.168.0.2
scroll numbers scroll numbers scroll numbers scroll numbers
*6 PPP Setup *6.1 Host IP
192
.168.0.1 192.168.0.1 192.168.0.1 192.168.0.1
scroll numbers scroll numbers scroll numbers scroll numbers
*5.3 Set Sub-Net
255
.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
scroll numbers scroll numbers scroll numbers scroll numbers
*5.2 Set IP Addr.
192
.168.0.1 192.168.0.1 192.168.0.1 192.168.0.1
Use DHCP: YES
*5 Network Setup *5.1 DHCP Setup Use DHCP: NO
scroll character scroll character scroll character
*4 Unit Name
i
DR iDRiDR
Max 16 characters
scroll day
*3 Day of Week DAY: Tuesday
scroll hours scroll minutes scroll seconds
*2 Clock
TIME: 12
:44:41 TIME: 12:44:41 TIME: 12:44:41
scroll patches
*1 Patch Select 01 Name
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iDR-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iDR-8 in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info