541356
38
Zoom out
Zoom in
Previous page
1/54
Next page
37
TO DISABLE OR ENABLE QUICKSOLO
Enter CONSOLE MODE by pressing SHIFT +
together.
The display indicates So= (solo on)
While holding SHIFT +
press RECALL
Leave the display set for solo mode on or off :
So= (solo on) or So (solo off)
If you try to use QuickSolo while disabled the display will indicate
OFF and none of the console mutes will be affected.
SOLO SAFES
QuickSolo can mute all the console mutes including channels, aux sends, groups and
main outputs. To hear the effect of soloed channels the required outputs should not
be muted. You may also wish to always hear the effect of signal processing devices
such as reverbs connected to the console aux sends and returns. Here, the aux sends
and channels allocated as effects returns should not mute when solo is activated.
The GL4000 includes a 'solo safe' facility so that selected mutes can be disabled from
the solo system. This works in the same way as the 'mute safes' described earlier but
affects solo and not the mute groups or patches. Any mutes made 'safe' can be
previewed and edited before QuickSolo is activated and without affecting the console
mute status. Solo safe settings are retained on power off and can be archived via MIDI.
MAKE A CHANNEL 'SOLO SAFE'
Press and hold QUICKSOLO
The LED flashes and the console is armed ready for
solo operation. No mutes are affected.
The green SAFE/PREVIEW LEDs show which
channels are already 'solo safe'.
While holding QUICKSOLO press EDIT SAFES
Both the QUICKSOLO and EDIT SAFES LEDs flash
to show that the console is in 'edit safes' mode.
While holding both, press a channel MUTE switch.
The SAFE/PREVIEW LED toggles on or off to show
if the channel will be made safe.
Select all the mutes you wish to make safe.
The SAFE/PREVIEW LEDs will show these every
time you arm or operate QuickSolo.
Release EDIT SAFES to exit 'solo safe' mode ready to
activate QuickSolo, or
Release EDIT SAFES and QUICKSOLO to return the
console to normal operation.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info