541356
32
Zoom out
Zoom in
Previous page
1/54
Next page
31
MUTE SAFES
Mute groups, patches and MIDI overwrite the console mutes with the settings held in
memory or an external controller. You may want to prevent selected channels being
overwritten, for example if you need to repatch mic channels to deal with a cable break
during a live show. In this situation it would not be convenient to reprogram the mute
groups and patches. Instead you would operate these channel mutes manually until the
show ends. You may also prefer to take manual control of lead performers to prevent
their channels being accidentally affected by the mute automation or MIDI.
The GL4000 includes a 'mute safes' facility so that selected channels can be 'made
safe' from the mute groups, patches and MIDI control. These settings are programmed
into non-volatile memory so that its contents are retained when power is removed.
Channel safes are selected and edited 'off-line' in much the same way as editing the
groups. All input channels, groups, aux sends, L, R and M can be made safe. Note that
the mute safes do not affect QuickSolo which has its own safes facility described later.
The safes setting can be archived via MIDI.
For channels made 'safe' : 9 Manual muting
8 Mute groups
8 Mute patches
8 MIDI input
9 MIDI output
THE CHANNEL SAFE/PREVIEW LED
In normal console mode the green LEDs below the MUTE
switches indicate which channels have been made 'safe'.
In 'edit group' , 'preview group' or 'preview patch' mode they
indicate channels which have been assigned to a mute
group or patch. In 'solo mode' they indicate channels which
have been made 'safe' from the solo system.
MAKE A CHANNEL MUTE 'SAFE'
Press EDIT SAFES
The red LED will start flashing.
This puts the mute system into 'edit safes' mode.
The channel safes are selected or edited 'off-line'
using the MUTE switches. This lets you assign safes
during a live show without affecting the mute status of
the channels.
Press the MUTE to be made 'safe'.
The green SAFE/PREVIEW LED below the MUTE
switch will turn on or off to show if the channel will be
'safe' or not.
Press EDIT SAFES again to exit edit mode.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info