541356
26
Zoom out
Zoom in
Previous page
1/54
Next page
25
LAMP CONNECTORS - Two top panel 4-pin XLR
connectors are provided for connection to gooseneck lamps.
It is recommended that these are the standard 12V 2.5 watt
type.
THE CONSOLE MONITOR - The GL4000 offers a
comprehensive signal monitoring system. Apart from the
extensive metering facilities there is a monitor section which
operates independently of the main outputs.
PFL TRIM - Adjust the trim control for the most comfortable
listening balance between AFL and PFL levels in the
headphones, local monitor or listen wedge. It is typical that
the AFL levels are generally quieter than PFL in live sound
mixing due to the fader settings in the mix. Normal level is
indicated at the centre detented '0' mark. You can reduce the
listening level by up to 12dB, or boost it by up to 6dB.
Adjusting the trim does not affect the PFL meter readings
which always display the actual signal level.
HEADPHONES MONITOR - You can plug in up to two
headphone sets, one on the top panel and the other safely
protected under the armrest. The headphone monitor has
its own PHONES LEV volume control.
LOCAL MONITOR - A separate stereo monitor output is
provided for connection to a local amplifier/speaker monitor
system. This is usually positioned on or near the console so
that the engineer can monitor the signals on speakers rather
than headphones. The volume is independently controlled
using LOCAL LEV. The local monitor doubles as a studio
monitor in the recording environment.
L-R MIX - Press this switch to listen to the post fader LR
main mix. In live sound mixing it is often preferred to turn off
the LR monitoring until required. This prevents distracting
audio spill from the headphones or local monitor. Of course,
pressing any AFL or PFL activates the monitors as normal.
STEREO/MONO - Press this switch to listen to the selected
monitor source in mono (L+R sum). This can help identify
problems with the mono/stereo compatibility of the signal.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info