Manual Alecto WS5400 (page 29 of 90) (English, German, Dutch, French)

794955

Zoom out

Zoom in

1/90

5. Mount the wireless outdoor unit with

the wind meter end pointing to the

North to correctly orient direction of the

wind vane.

Mounting on pole (Pole

Diameter 25~33mm)

Mounting on the railing

(25~33mm)

North

6. When mounting on pole.

Secure the vertically installed

mounting stand and the included

clamp to the post / pole using the

included screws.

Install the wireless WS5400 outdoor sensor at least 1.5m off the ground for better and more accurate wind measurements.

Install the wireless WS5400 outdoor sensor as level as possible to achieve accurate rain and wind measurements.

Install the wireless WS5400 outdoor sensor with the wind sensors pointing north. See point 5 of installing the mounting pole.

Choose an open area within range of the display

BATTERY INSTALLATION INDOOR UNIT

Backup battery provides power to the console to retain clock time and date, max/min records and calibration value.

Step 1 Step 2 Step 3

Remove the console battery

door with coin

Insert a new CR2032 button

cell battery

Replace the battery door

The backup battery can back up: Time & Date, Max/Min records and calibration value.

The built-in memory can back up: connection settings.

Please always remove the back-up battery if the device is not going to be used for a while. Please keep in mind that even

when the device is not in use, certain settings, such as the clock, calibration and records in its memory, will still drain the

back-up battery.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS5400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto WS5400 Manual

Product: