707374
50
Zoom out
Zoom in
Previous page
1/58
Next page
50
3.5 To reset measured data:
After completing the installation, press and hold the “HISTORY” button for 10 seconds to delete all data
measured up to that point. This avoids looking at measurements at a later time that were caused by
movements during installation.
4. USE
4.1 General functions:
The display shows the following basic functions / data:
DST
AM
PM
PST
MST
CST
EST
AST
NST
2 3
9
4 51
10
6 7
118 12
1. Appears when the battery of the indoor unit is nearly empty
2. Appears when pressing the MEM button to show the maximum or minimum value in the display (*1)
3. AM/PM (morning or afternoon) display in 12-hour format.
4. Display of the actual time
5. Display of the day of the week (*2)
6. Display of the month and date
7. Appears when the summertime is set (DST - Day Saving Time) (only when the DCF-77 is switched on
and being received correctly)
8. No operation
9. Appears with the display of the history
10. Appears when the alarm clock is set and activated
11. Appears in case of the frost alert (see chapter 5)
12. Appears when the DCF clock radio signal is being received
*1: By repeatedly pressing the “MEM” button, the following data are shown on the display in the order of:
1. Maximum indoor temperature
2. Minimum indoor temperature
3. Maximum humidity indoors
4. Minimum humidity indoors
5. Maximum outdoor temperature
6. Minimum outdoor temperature
7. Maximum humidity outdoors
8. Minimum humidity outdoors
9. Maximum physiological temperature
10. Minimum physiological temperature
11. Maximum heat index
12. Minimum heat index
13. Maximum dew point temperature
14. Minimum dew point temperature
15. Maximum wind chill
16. Minimum wind chill
17. Maximum average wind speed
18. Maximum speed wind gust
The upper part of the display shows on which day and at what time the concerned minimum of maximum
value was measured.
Press and hold the MEM button for 2 seconds to delete the displayed memory.
*2: By pressing the button you may switch the display of the clock between “seconds” display and “day”
display.
4.2 Contrast setup:
Repeatedly press the button to adjust the display contrast of the indoor unit. Each time you press the
button, the contrast is decreased in increments of 8. After the lowest setting the contrast is switched back to
the highest setting.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 21,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info