Manual Alecto WS-3400 (page 49 of 58) (English, German, Dutch, French)

707374

Zoom out

Zoom in

1/58

Outdoor unit placement tips:

Make sure that the distance between the outdoor and indoor unit is no more than 50 metres.

3.4 Clock:

Introduction:

The WS-3400 is equipped with a built-in DCF receiver in the indoor unit. This receiver is used for receiving

the DCF time signal from Frankfurt. This signal ensures that the clock displays an extremely accurate time,

provided that the signal is being received properly.

Automatically:

As soon as you insert the batteries into the indoor unit, after 1 minute and during 5 minutes, the clock starts

searching for the DCF radio signal to set the time and date while the antenna symbol ashes. After sev-

eral seconds or minutes the WS-3400 shows the correct time. In extreme cases it may take longer than a

day until the DCF time is displayed. The best reception of the DCF signal occurs at night and it’s automati-

cally refreshed at: 2:00 am, 3:00 am, 4:00 am and 5:00 pm.

Manually:

If the clock is not or not correctly receiving the radio signal, you may manually set the clock as follows:

1. Press and hold the button for 2 seconds, 12Hr or 24Hr appears in the display

2. Use / to set the time format, briey press the button

3. Use / to set the hours, briey press the button

4. Use / to set the minutes, briey press the button

5. Use / to set the seconds to 0, (this allows you to make the clock run simultaneously with

your own clock), briey press the button

6. Use / to set the year, briey press the button

7. Use / to set the month/day or day/month display, briey press the button

8. Use / to set the month, briey press the button

9. Use / to set the date, briey press the button

10. Use / to set the dierence in hours compared to the DCF time. For use in the Benelux,

select ‘0’ and briey press the button

11. Use / to set the language for displaying the date, you may choose from: EN (English), FR

(French), DE (German), ES (Spanish) , IT (Italian), NL (Dutch) and RU (Russian), briey press the

button

12. Use / to determine whether the clock must automatically switch to Daylight Saving Time

(AUTO) or to do this yourself (OFF), briey press the button

The clock is now set manually.

When the DCF receiver is enabled and a strong signal is being received, the receiver will overwrite the

clock display.

To switch the DCF receiver on/o:

You may switch o the DCF receiver as follows to only display the time and date as programmed by you:

• To switch o: press and hold the RCC button on the indoor unit for 8 seconds until OFF appears and

the antenna symbol disappears

You may switch the receiver back on again as follows:

• To switch on: press and hold the RCC button on the indoor unit for 8 seconds until ON appears and the

antenna symbol starts ashing

The symbol in the upper middle part of the display shows the status of the DCF clock:

No symbol: the DCF receiver is disabled; the time shown is determined by the internal clock of

the WS-3400.

Flashing: the DCF receiver is enabled and is searching for the DCF signal; the time shown is

determined by the internal clock of the WS-3400.

Constantly lit: the DCF receiver is enabled and is receiving the DCF signal; the time and date

shown are determined by the atomic DCF clock in Frankfurt.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 21,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto WS-3400 Manual

Product: