626270
19
Zoom out
Zoom in
Previous page
1/104
Next page
19
GB
Button sound
With this function you can connect or
disconnect the button sound to the
buttons. The button sound is discon-
nected in the factory setting.
When OF is displayed, step 2.
with the arrow key until Sn is
displayed. Press +/On and the
button sound is connected.
Press -/Off to disconnect the 3.
button sound. Then press
Store to leave the button
sound function.
Press the button with the arrow 1.
until the Menu symbol flashes.
Press +On.
SERVICE
With this function one can see
what values* from the heater are
displayed. The values are updated
once per second.
When OF is displayed, step with 2.
the arrow key until SE is dis-
played.Press +/On to see the
various values (-/Off can also be
used).
To leave Service, press Store.3.
Press the button with the arrow 1.
until the Menu symbol flashes.
Press +On.
* The values shown during service are:
FA (revolutions): The speed of the fan divided by 2.
SH (temp): Warm water temperature.
HE (temp): Operating temperature.
OH: If the overheating protection has been tripped On or
alternatively Off.
HS (X): Software version in the heater.
PS (X): Software version on the panel.
I: Amp. Guideline value shown in steps of 0.5 A.
WI: Window breaker on-off.
ES: External start on-off.
10-RS: Heater information, only for ALDE.
Menu Menu18.
In the ”Menu” setting one can activate a number of functions. To activate the
function you must first light up the lower row of functions (see item 12).
To step between the various functions, use the arrow keys.
OFFSET(Temperature adjustment)
With this function you can calibrate
the temperature on the panel if you
notice that the temperature (the
stabilised room temperature) does
not correspond with the temperature
shown on the panel.
Press the button with the arrow 1.
until the Menu symbol flashes.
Press +On.
When OF is displayed, adjust the 2.
temperature displacement with +/
On or -/Off (+/-5°C in intervals of
0.5°C).
Press Store to leave the OFF-3.
SET function.
Press the button with the arrow 1.
until the Menu symbol flashes.
Press +On.
PUMP 12V/PUMP AU.
The12V pump is used in the PU 12
setting even if 230V is connected. In
the PU AU position, the 230V pump
works, and when 230V is discon-
nected, the 12V pump starts. The PU
AU function is activated in the factory
setting.
When OF is displayed, step with 2.
the arrow key until PU AU is
displayed. Press +/On and PU
12 is displayed.
Press -/Off and PU AU is dis-3.
played. Press Store to leave the
pump function.
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde 3010 Control panel - 213 LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - 213 LCD in the language / languages: All languages as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info