626270

Alde 3010 Control panel - 213 LCD Manual

18
Zoom out
Zoom in
Previous page
1/104
Next page
18
Starting the heater automatically AutoOn16.
Press the button with the arrow 1.
until the AutoOn symbol flashes.
“OFF” is shown in the display.
To activate AutoOn, press the +/
On button or the -/Off button
to close the function.
The start time will be displayed. 2.
Set the time in accordance
with item 12 and press ”Store”
to store the settings. “OFF” is
shown in the display.
Press the +/On button. On 3.
is shown in the display and
AutoOn flashes. Set the panel’s
main breaker to OFF.
This function is used if you want the heater to start auto-
matically at a later time. The heater works for 24 hours
and then stops.
Automatic start is repeated the following week as long
as the function is activated.
To activate the function you must first light up the lower
row of functions (see item 12).
The function controls the panel’s main breaker.
When you arrive at the vehicle, boat or building and
AutoOn is activated, deactivate AutoOn to prevent the
boiler from stopping after 24 hours (the boiler cannot be
switched off when AutoOn is activated).
Load monitor Amp 17.
This function is used if you do not want the 230V fuses
to become overloaded. If the total power consumption
of the vehicle, boat or building exceeds the set value,
the power effect will be reduced automatically.
On account of voltage variations and tolerances, one
can select various control levels (for example, for 6A
fuse, one can choose either 5,6,7 Amp setting).
If the fuse does not hold, select a lower set value.
The function is disconnected in the factory setting.
To use this function, a load monitor (3010246) must be
installed in the 230V distribution box. To activate the
function, you must first light up the lower row of func-
tions (see item 12).
Press the button with the arrow 1.
until the Amp symbol flashes.
“OFF” is shown in the display.
Press the -/Off button to ac-2.
tivate and set the function.
The following values can be
set with +/On or -/Off buttons,
5,6,7,9,10,11,15,16,17.
Amp is shown in the display 3.
when the panel returns to
standby.
blinkar
flashes
blinkar
flashes
blinkar
flashes
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde 3010 Control panel - 213 LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - 213 LCD in the language / languages: All languages as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info