• When the station that you would like to listen to is displayed press the
“Tune/Select” to switch. “Connecting…” will be displayed whilst your DAB+ radio
tunes to your selected station.
•
In FM mode, the radio will tune to your selected station automatically.
1.4 Scanning for stations
With DAB+ radio, additional stations and services regularly become available so it’s a
good idea to carry out a manual scan every now and then to make sure that you have the
most up to date station listing stored within the memory of your radio (you maybe need to
know what frequency band the additional stations was in). If you have moved your radio to
another location, eg: if you go on holiday, then it’s also a good idea to carry out a manual
scan.
•
If you are not already in DAB+ mode, Press the “DAB/FM” button to go to DAB+
mode.
•
Press the “Auto Scan” button to begin to search for stations. The display will
change to ‘Scanning...”and the number of stations found during the scan will be
displayed.
• If you are using your DAB+ radio outside of your area, we recommend to perform a
full scan. Then Press and hold the Scan button for 2 seconds to begin a complete
scan procedure. Full scan takes approximately 1 minute but can take up to 3
minutes.
1.5 Station Display Symbols
You may see the following symbols displayed alongside a station name.
? Station is not available/not active. This could be used if you try to tune into a
secondary service/station at a time when it is not transmitting.
>>> behind the station name means that this is a primary station with secondary
services eg: a sports station may add extra commentaries at certain times of the
day
<<< before the station name means that this is a secondary station.
1.6 Storing a station preset
Your DAB+ radio can store up to 8 DAB+ and 8 FM stations in its preset memories for
instant access to your favorite’s stations.