number between 0 - 99.It will not be possible to satisfactorily listen to a radio station with a
signal error rate of 30 or above. Try adjusting the aerial or relocating your radio to improve
reception.
Signal bit rate –Stereo or Mono and the data rate at which the signal is being transmitted,
e.g. 192 kbps / MP2
Time - supplied by the broadcaster.
Date - supplied by the broadcaster.
Remark: In FM mode, there will no the display of Channel Frequency, Signal Error and
Signal Information.
Using the Menu
The “Info” button enables you to change some of the default settings of your DAB+ Radio,
so that it works just the way you want it to.
Tips: You need to press and hold Info for load this MENU dialogue
2. In DAB+ mode
2.1 Full Scan
Full Scan searches for all possible stations. During the scanning process, at the right-up
corner will show the number of the available stations
Note: Adjust the position of the aerial on the radio, to obtain the maximum signal strength.
2.2 Manual tune
Using the manual tune feature, you can select a specific digital radio channel frequency
and then manually adjust the aerial, or the location of the radio, to get the strongest
possible signal for that channel in your location.
•
Press and hold the Info-Menu button for 2 seconds to enter the default settings
menu.
• Use the Tune/Select knob, rotate to display “Manual tune” and press Tune/Select.
• Rotate the Tune/Select switch to scroll through the digital radio frequencies and
press Tune/Select to confirm it.
An empty □ will appear on the first line of the display to indicate the minimum signal
strength for acceptable listening. The row of solid rectangles indicate the actual signal
