Manual Al-ko KHS 5200 (page 11 of 106) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460709

Zoom out

Zoom in

1/106

Log splitter

GB 2

No other persons should be present within the

working area of the log splitter. Special heed

should be paid to children and animals.

The user of the unit bears responsibility for

accidents involving other persons or their prop-

erty. The working area should be kept free of

timber pieces and other objects – risk of stum-

bling.

Safety equipment

Motor circuit breaker

The motor circuit breaker switches the motor off

in the event of overloading of the log splitter. The

motor circuit breaker function should not be

deactivated.

Proceed as follows if the motor circuit breaker

deactivates the log splitter:

1. Disconnect the log splitter from the mains

power supply.

2. Remedy the cause of overloading.

3. Re-establish the power connection after

allowing the unit to cool for several minutes

and switch on the log splitter.

Connection cable

Only rubber cable complying with the H07RN-F

quality standard stipulated in VDE 0282 Part 14

with a wire cross section of min. 2.5 mm² should

be used.

The max. permissible cable length is 10 m. A

longer cable impairs the motor performance and,

consequently, the function of the log splitter.

The connection cable, plug and connection

socket should be free of damage.

Repairs to the connection cable, plug and con-

nection socket should only be realised by a

specialist electrical firm or workshop. A defective

connection cable (e.g. with cracks, cuts or bends

in the insulation) should not be used.

Plug connections should not be exposed to

damp or water.

Caution!

Do not damage or sever the connection

cable.

Proceed as follows in case of damage:

1. Disconnect the connection cable immediately

from the mains power supply.

Electrical requirements:

KHS

3700, KHS 5200 models

− 230 V/50 Hz current

− Min. connection cable cross section = 2.5 mm²

− Min. mains connection fuse protection = 16 A

Correct use

The log splitter is designed for private use in the

home and garden.

The log splitter is designed exclusively for the

following applications:

− Splitting freshly-cut timber that does not

exceed the dimensions specified in the tech-

nical data.

Incorrect use

− Splitting of timber containing metal compo-

nents such as nails, wire, metal braces, etc.

is prohibited

− Operation in potentially-explosive atmos-

pheres is not permitted

− Any other utilisation above or beyond correct

use is prohibited.

Unit description (Illus. A/B)

1 Protection cover

2 Log pusher

3 Log guide tubes

4 Splitting wedge

5 Piston rod

6 Transportation bracket

7 ON/OFF switch on electric motor

8 Operating lever

9 Rear feet (only KHS 5200)

10 Support foot (only KHS 5200)

11 Park position transport wheels

(only KHS 5200)

12 Front feet (only KHS 5200)

13 Front cross member (only KHS 5200)

capacité hydraulique ( remplacement du liquide hydraulique ,combien de litres SVP ??? ) Submitted on 9-5-2023 at 14:07
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko KHS 5200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko KHS 5200 Manual

Product: