594615
17
Zoom out
Zoom in
Previous page
1/150
Next page
Startup
440 083_a 17
4. Hold the appliance with both hands. Do not
place the cutter head on the ground when do-
ing this.
5. Hold the auxiliary handle in one hand and the
upper grip with your other hand.
6. Press the switch in the upper grip and hold it
pressed. The appliance runs.
7. Let the lawn trimmer run at idling speed for a
few moments. This causes the cutting line to
be cut off to the correct length.
8. The appliance switches off when the switch is
released.
ADVICE
After the appliance has been switched
off, the spool head continues to rotate for
a few seconds.
OPERATION
Switch on the appliance before approaching
the grass to be cut.
Angle the appliance forwards slightly, and
walk forwards slowly (9).
Sweep the appliance to the right and left in
order to cut the grass (9).
Long grass must be cut in several passes. Always
proceed from top (10-1, 10-2) to bottom.
ADVICE
Tap the spool head on the ground from
time to time when working. The automa-
tic tip function always keeps the line at
optimum length.
Use the plant protection car in order to hold
the appliance at the correct distance from
obstacles (11-1).
Make sure the motor is stopped before you
remove any cuttings.
CAUTION!
The vibration value during use of the
electrical implement may differ from the
indicated value, depending on what the
appliance is used for.
Do not overload the appliance during work.
MAINTENANCE AND CARE
CAUTION!
Danger from electrical current!
Before all maintenance and care jobs,
disconnect the appliance from the mains
and secure it to prevent it from being
switched back on.
After use, disconnect the mains plug and
check the machine for damage.
Keep the appliance out of reach of children
and unauthorised persons.
Electrical malfunctions are only allowed to be
rectified by authorised specialist workshops.
Never use the appliance if the blade of the
line cutter is missing or damaged.
Always keep the guard, string head and en-
gine free of mowing debris.
Do not spray the machine with water! Pene-
trating water (ignition system, carburettor...)
can lead to malfunctions.
Do not get the appliance wet or expose it to
moisture.
Regularly check the appliance is in good
working order.
Do not use any cleaning agents or solvents.
They can cause irreparable damage to the
appliance.
Changing the spool
(Replacement spool GTE art. no. 112966)
1. Press the two locking catches to open the co-
ver (8-1).
2. Remove the empty spool (8-2).
3. Insert the new spool.
4. Make sure that the spring is re-inserted (8-3).
5. Guide the line outwards on both sides.
6. Put on the cover and engage the locking cat-
ches.
STORAGE
Clean the appliance and its accessories after
each use.
ADVICE
Hang up the lawn trimmer by its handle.
This avoids placing unnecessary load on
the cutter head.
Store the appliance in a dry place protected
against frost.
DISPOSAL
Do not dispose of old
equipment,batteries or accumulators
as householdwaste!
Product, packaging, and accessories
were made with recyclable materials, and
should be disposed of accordingly.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko GTE 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko GTE 450 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info