Manual Al-ko BF 5002R (page 13 of 69) (English, German, Danish, French, Italian, Polish, Swedish)

606330

Zoom out

Zoom in

1/69

548 977_e

Combi BF 5002-R

Transporting and storing the device. 

Assembling the cutter bar. 

Replace the protective strip if damaged. 

Front rotary mower

Only use the device on grassy surfaces. 

When moving outside the surface to be mown, switch 

off the mower.

Rotary tiller

Do not use the device on ground with large stones. 

Rotary sweeper

Dirt, stones, twigs, etc., can be thrown up during 

sweeping.

Keep third parties away from the danger area. 

Mounting

Observe the separate, enclosed assembly

instructions for information on assembling this

machine.

The Fig. references refer to the illustrations at the start of

this documentation.

Description of machine -

Fig. 1

1 Throttle 4 Locking lever for

steering column

2 Clutch lever for drive

mechanism

5 4-stroke petrol

engine

3 Clutch lever for at-

tachment

6 Gear shifting shaft

Adjusting the guide bar

Guide bar above the engine -

Fig. 3 -

for:

Cutter bar 

Front rotary mower 

Rotary sweeper 

Snowplough 

Guide bar behind the machine

Fig. 4 -

for:

Ridge plough 

Rotary tiller 

Adjusting the working position -

Fig. 2

Depending on the specic attachment, the guide bar must

be swivelled into the required working position with the

steering column.

Remove the gear shaft (a) from the guide bar.1.

Unscrew the locking lever (b) until the steering column 2.

disengages from the toothing.

Rotate the steering column through 180° into the 3.

desired working position and engage it in the middle of

the toothing.

Screw the steering column rmly back in place.4.

Reinsert the gear shaft (a).5.

Adjusting the height -

Fig. 5

Adjust the height of the guide bar to the height of the opera-

tor. The normal height setting is hip height.

Loosen the screws to the left and right of the guide bar.1.

Adjust the guide bar height within the slot range.2.

Retighten screws.3.

Swivelling the guide bar -

Fig. 6

The steering column can be swivelled from the central posi-

tion to two additional locking positions, one on the right and

one on the left. This means that the machine can be guided

near the ground from the side.

Unscrew the locking lever (1.

Fig. 2 - b

) until the steering

column disengages from the toothing.

Swivel the steering column into the desired working 2.

position and engage it in the toothing, taking care not

to trap the Bowden cables.

Screw the steering column rmly back in place.3.

Caution!

The steering column must only be screwed in place in

the 3 designated locking positions! Intermediate posi-

tions are not permissible!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BF 5002R in the language / languages: English, German, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko BF 5002R Manual

Product: