606330
12
Zoom out
Zoom in
Previous page
1/69
Next page
12
Translation of original user instructions
Introduction
Read this documentation before starting up the ma-
chine. This is a precondition for safe working and aw-
less operation.
Observe the safety warnings in this documentation and
on the machine.
This documentation is a permanent integral part of the
product described and must be passed on to the new
owner if the machine is sold.
Explanation of symbols
Caution!
Following these safety warnings carefully can prevent
personal injury and/or material damage.
Special instructions for greater ease of under-
standing and improved handling.
Symbols on the machine or attachments
Read instruction manual
before starting up the machine!
Keep third parties away from the
danger area!
Remove spark plug connector before
commencing work on cutting parts!
Rotating unit!
Keep hands and feet from the unit!
Sharp cutting tool!
Keep hands and feet from the unit!
Designated use
This machine is exclusively intended for private use in
houses and allotments and may only be used with one of
the following attachments:
Cutter bar
Front rotary mower
Ridge plough
Rotary tiller
Rotary sweeper
Snowplough
Snow chains for multipurpose machine
Safety instructions
The machine may only be used in perfect technical
condition.
Protective guards and other safety equipment must not
be disabled.
Keep hands and feet away from cutting parts.
Keep third parties away from the danger area.
Remove foreign bodies from the working area.
Always ensure stability.
Do not work on slopes with a gradient of more than 10°.
Always work perpendicular to the slope.
Do not use the machine indoors (toxic fumes!)
The exhaust and the areas around it can get very hot.
Do not leave the machine unattended.
When leaving the machine:
Switch off the engine.
Wait until the cutting parts have stopped moving.
Remove the spark plug connector.
Children and other persons who are unfamiliar with the
operating instructions must not operate the machine.
Observe local regulations regarding minimum age
requirements for operating the machine.
Safety instructions regarding attach-
ments
Caution!
Only attachments approved by the manufacturer of the
machine may be used!
To mount attachments, ensure that the machine cannot
roll away and secure attachments rmly in place.
Only fasten attachments with the engine and drive
mechanism switched off.
Cutter bar
Caution!
Cutter bar has partially exposed blades!
Risk of injury!
Always attach the protective strip to the cutter bar
when:
Mounting the cutter bar on the machine.
Cleaning the device.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BF 5002R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BF 5002R in the language / languages: English, German, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info