606330

Al-ko BF 5002R Manual

15
Zoom out
Zoom in
Previous page
1/69
Next page
15
548 977_e
GB
Combi BF 5002-R
Activating the drive mechanism for:
Cutter bar Rotary tiller
Front rotary mower Rotary sweeper
Swing safety bar1.
out of the way.
(Fig. 10 - 3)
Push clutch lever fully away and hold it in place. 2.
(Fig. 10 - 4)
The attachment must not start to function until
the clutch lever has covered half the distance,
otherwise adjust the Bowden cable.
Switching off
Release3.
the clutch lever.
(Fig. 10 - 1)
The drive mechanism is switched off.
Release4.
the clutch lever.
(Fig. 10 - 4)
The attachment is switched off.
Set throttle to “STOP” position.5.
(Fig. 12)
The engine is switched off.
Maintenance and care
Caution!
Risk of injury on sharp cutting tools.
Wear protective gloves!
Remove the spark plug connector before commencing
any maintenance or cleaning work!
Do not spray the machine with water! Water penetra-
ting the machine could cause it to malfunction.
Clean the machine after every use.
If the machine is left leaning to one side, the spark
plug must face upwards!
Locating bushing for attachments
Clean the locating bushing for attachments after every
use and grease with commercially available multipur-
pose grease.
(Fig. 13)
Gears
Regularly check the oil level in the gearbox. The oil
drain plug screw is located on the gear casing, above
the wheel axle, on the same side as the petrol lling
connection of the engine.
(Fig. 14)
Position the machine horizontally; support accordingly.
Push off spring connector on the wheel axle and re-
move the wheel.
Unscrew the oil drain plug screw.
Oil level: up to the lower edge of the ller hole; top up
gear oil if required.
Oil type: Gear oil SAE 80
Oil lling quantity: approx. 0.50 l
Tyre pressure
2.25 bar
Adjusting the Bowden cables
Drive mechanism for attachmentsa. (without lock nut)
(Fig. 15)
Drive mechanismb.
Unscrew lock nuts.1.
Adjust the2.
adjusting screw.
(Fig. 16 - 2)
Care of the engine
Air lter
Spark plug
Oil change
Observe the operating instructions provided by the manu-
facturer of the engine.
Professional inspection required:
after collision with an obstacle
if an attachment is bent
in the case of damage to the gears
in the case of defective V-belts
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BF 5002R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BF 5002R in the language / languages: English, German, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info