630564
54
Zoom out
Zoom in
Previous page
1/60
Next page
54
APPLICATIONS
MIDI SYNC APPLICATIONS
XR20 As MIDI Timing Master
The XR20 can control several other slave MIDI drum machines or sequencers by turning on MIDI
Clock Out, which sends XR20 timing information down the MIDI line.
1. Turn on MIDI Clock Out (page 6 of the Record Setup menus).
2. Program the slave units to not follow their internal clocks, but to accept external MIDI Clock
and Start/Stop data. Refer to each device's manual to find out how to do this. Enable the
slave's Song Position Pointer if it is available.
3. Press PLAY on the XR20. The slave units should start at the same time, and progress at the
same tempo. If the slaves respond to Song Position Pointer, you can start an XR20 Song at
any point, and after a few seconds the slaves will catch up and synchronize from that point
on.
The diagram on the right shows a
XR20 serving as the MIDI system
master clock, with a sampler device
set as a slave. To slave the sampler
(or any external device accepting
MIDI in) use a 5-pin MIDI cable to
connect the MIDI OUT of the XR20 to
the MIDI IN of the device.
XR20 As MIDI Timing Slave
The XR20 can be controlled by external devices through MIDI Clock. This allows you to sync
playback and tempo on the XR20 to your external MIDI device.
1. Turn on MIDI Clock In on the XR20 (page 5 of the Record Setup menus).
2. Program the master unit to send MIDI Clock. Refer to each device's manual to find out how
to do this.
3. Press PLAY on the master clock device. The XR20 should start at the same time, and
progress at the same tempo.
The diagram on the right shows a
XR20 serving as a MIDI system
slave, with a synth workstation
device set as the master clock
source. To slave the XR20, use a 5-
pin MIDI cable to connect the MIDI
OUT of the master clock device to the
MIDI IN of the XR20.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai XR20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai XR20 in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai XR20

Akai XR20 Quick start guide - English, German, French, Italian, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info