630564
52
Zoom out
Zoom in
Previous page
1/60
Next page
52
Page 15 / LOW BATTERY WARNING (LO BATT)
On this page you can specify the threshold the battery
should reach before warning of low battery. This
warning will let you know when it is time to replace the
batteries or plug in the power adapter.
Use the number buttons, INC / DEC buttons or the
VALUE dial to select a percentage of the full battery
charge.
Page 16 / CHECK AVAILABLE MEMORY (MEM FREE)
This page shows the approximate amount of free
memory available (expressed as a percentage of the
total amount).
It is important to check memory from time to time
because the XR20 always requires some free memory
for proper operation. If the available memory falls below
15% or so, immediately save the XR20's data as
described below.
Some operations may not be possible even if a small amount of memory is left. This is because
the XR20 duplicates a Pattern before it is modified (length change, offset change, etc.). If you try
to alter a Pattern that takes up more memory than is available, the display will tell you that there
is no more memory left.
Immediately save the XR20's data, and determine whether you can erase any unwanted Patterns
or Songs to free up some memory.
Page 17 / SEND SONG AND PATTERN DATA TO MIDI SYS EX STORAGE DEVICE (SEND
OUT MIDI?)
This page allows you to convert the XR20's Pattern and Song information into MIDI system
exclusive data and send this data through the MIDI out. This data can be transferred to software
and hardware devices which support MIDI SysEx
storage.
There are two main reasons to save your work:
Although the XR20 can typically store many
events, eventually it will run out of memory. You
can save the memory contents, fill up the memory
with new Patterns and Songs, and re-load the old
data when needed.
It is vitally important to back up what's in the XR20's memory! A mechanical problem (surge
on the power line, a quick zap of static electricity) or operator error could alter the data in
memory. Save your data whenever you've done enough work on something that you
wouldn't want to lose that work. If possible, make two backups, and store the second
backup in a different physical location from the primary backup.
While on this page, press REC (DO IT) to send XR20 Pattern and Song data as SysEx data. The
display will say SENDING MIDI… to confirm that data is being sent.
Note: Typically, the MIDI OUT would connect to another XR20's MIDI IN or a system
exclusive data storage device such as MIDI sequencer.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai XR20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai XR20 in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai XR20

Akai XR20 Quick start guide - English, German, French, Italian, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info