630577
118
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
108
Chapter 16: Save / Load
Loading a sample
You can load a sample file one by one. You can also
assign the sample to the pad.
01. Select a sample file and load it. The Load a Sample
window will be displayed.
You can listen to the sample by pressing the [F2]
(PLAY) key.
To cancel the loaded sample, press the [F4]
(DSCARD) key.
02.
Select the pad to assign the selected sample by hitting it.
When you hit the pad, the pad number will be dis-
played in the Assign to pad field.
If you do not wish to assign the sample to any pad,
select OFF by turning the DATA wheel to the left.
03. Press the [F5] (KEEP) key.
The loaded sample will be assigned to the selected pad.
Tips : You can load the “.snd” files. This includes files from
MPC3000/2000/2000XL.
Loading Audio CD from the internal CD drive
(option)
If you select “CD” in the Load from: field, you can
load audio track in Audio CD in the internal CD
drive (optional) as well as the sample file.
01. In the File field, select the track.
You can audition the selected track with pressing
[F4] (PLAY) key.
02. Press the [F5] (DO IT)
The MPC2500 will start loading the audio track.
Note : The MPC2500 cannot load an audio track that is greater
in size than is available in the internal memory. The data size of
the selected track will be displayed in Size: field.
The maximum internal memory with EXM128 (op-
tional) is 128MB.
Approx. 12 minutes can be sampled in this manner as
you will need approx. 10MB for each track minute.
Loading a program
You can load a program file one by one.
01. Select a program file and load it. The Load a Pro-
gram window will be displayed.
To cancel the operation, press the [F4] (CANCEL) key.
02. In the Load field, select if you wish to load the
samples as well.
WITH SAMPLES
The MPC2500 will load the samples used for the
program as well. Normally select this option.
PROGRAM ONLY
The MPC2500 will load only the program file.
It does not load the samples. Select this option
when you wish to create a new program by as-
signing different samples to the saved program.
03. If you selected WITH SAMPLES in the Load field,
make settings in the Replace same samples in
memory field.
You can set how to handle the file when you al-
ready have the data with the same name as the load-
ing file in the unit.
NO The MPC2500 will not load the sample with
the same name.
YES The MPC2500 will overwrite the data by
the new data.
04. Press the [F5] (DO IT) key.
The MPC2500 will start loading the data.
Deleting the data in the memory before loading
When you press the [F2] (CLEAR) key instead of
the [F5] (DO IT) key in step 4., you can clear the
MPC2500’s memory and load only the selected pro-
gram in the memory.
01. In the step 4, press the [F2] (CLEAR) key instead of
the [F5] (DO IT) key.
The CAUTION window will be displayed. If you press
the [F5] (DO IT) key, the MPC2500 will start loading
the program after it clears all its internal memory.
Note : If you do this operation, all the data saved in the unit will
be deleted.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info