630577
120
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
110
Chapter 16: Save / Load
Loading a project
When you use SAVE ENTIRE MEMORY mode to save
the data, the MPC2500 will load the project file that
will be created. When you load a project file, all the
data currently saved in the unit will be overwritten by
the data that the project file will load.
01. Select a project file and load it. The CAUTION win-
dow will be displayed.
02. Press the [F5] (DO IT) key.
The loading will begin.
Loading an Input Thru file
If you use “SAVE ENTIRE MEMORY” to save the inter-
nal memory data the Input thru file will be saved with
the Project file. The Input Thru file contains the settings
of Input Thru in the MPC2500.
When you load the Project file, the Input Thru file will
be loaded automatically with the Project file. You can also
load only the Input Thru (.IPT file) file in the Load page.
Renaming a file
You can change the name of the file in the memory card.
01. In the To field of the SAVE page, press the [WIN-
DOW] key.
The Directory window will be displayed.
02. Select the desired file with a cursor key.
You can move through directories with the left/
right cursor keys.
03. Press the [F3] (RENAME) key.
The Name window will be displayed.
04.
Enter the new name and press the [F5] (ENTER) key.
For more information about setting the name, see
the “Setting names” section on page 10.
Note : If you change the file name, the MPC2500 may not be able
to load the file properly. For example, the samples used for a pro-
gram are saved in the program file as the sample name. IF you
change the name of the sample file, the MPC2500 cannot find it
when loading the program.
Deleting a file
You can delete the files in the memory card.
01. Open the Directory window in the SAVE page.
02. Select the desired file with a cursor key.
You can move through the directories with left/
right cursor keys.
03. Press the [F2] (DELETE) key.
The Delete File window will be displayed.
04. Press the [F5] (DO IT) key.
The selected file will be deleted.
Note : You can select a folder and delete it. If you delete a folder,
all the files in that folder will be deleted.
Setting the auto load function
In default, the auto load function, which loads the preset
sounds and demo sequence automatically when you switch
on the MPC2500, is activated. You can deactivate this func-
tion so that the MPC2500 will not load anything when
switched on.
01. Press the [WINDOW] key in the LOAD from field of
the LOAD page.
The Load Setup window will be displayed.
02. In the Autoload field, set the field to OFF.
03. Press the [F4] (CLOSE) key to close the window.
Next time you switch on the MPC2500, it will not
load anything.
Tips : You can load the preset sounds and the demo sequence
separately by selecting the INTERNAL MEMORY in
the LOAD
from field of the LOAD page.
Tips : When you insert the memory card, which has AUTOLOAD
folder, into card slot and switch on the MPC2500, the MPC2500
will load the AUTOLOAD folder in the memory card automati-
cally, regardless of the setting in the Autoload field.
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info