630577

Akai MPC2500 Manual

116
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
106
Chapter 16: Save / Load
Saving all the data in the memory at the
same time
You can save sample/program/ALL files at the same time.
When you save the data, a project file will be saved, as
well as a sample, program and ALL files. The project file
does not have actual sample or sequence data, but it has
the information about the sample/program/ALL files
that are saved when you save the data. When you load the
project file, the sample/program/ALL files saved with
the project file will be loaded automatically and set the
MPC2500 to the same status when you saved the data.
For example, if you select SAVE ENTIRE MEMORY when
you save the data after finish working on it for the day,
you can start the MPC2500, the next day, from where you
finished the previous day.
01. In the To field of the SAVE page, select the destina-
tion folder.
02. In the Type field, select SAVE ENTIRE MEMORY.
03. Press the [F6] (DO IT) key.
The Save Entire Memory window will be displayed.
04. In the Project name field, select the name of the
project file to save.
05. In the Replace same files field, set how to handle the
file when you already have the data with the same
name as the loading file in the unit.
NO The MPC2500 will not save the file with the
same name.
YES The MPC2500 will overwrite the data by
with new file.
06. Press the [F5] (DO IT) key.
The MPC2500 will start saving the data.
About Input Thru (.IPT) file
If you use “SAVE ENTIRE MEMORY” to save the Internal
memory data, the Input thru file will be saved with the Project
file. The Input Thru file contains the setting of the Input Thru in
the MPC2500. When you load the Project file, the Input Thru
file will be loaded automatically with the Project file. You can also
load only the Input Thru file (IPT File) in the Load page.
Creating the Autoload folder
When you create an AUTOLOAD folder on the memory
card, the MPC2500 will load the contents of the
AUTOLOAD folder automatically when you switch on
the unit with the memory card in the card slot. You can
load the most frequently used drum set program or
sequence data automatically.
01. In the Type field, select SAVE ENTIRE MEMORY.
AUTOLOAD folder will be created in the ROOT
folder, which is located at the top directory, so you
do not have to select the destination folder.
02. Press the [F6] (DO IT) key.
The Save Entire Memory window will be displayed.
03. Press the [F2] (A.LOAD) key.
The Save Auto load File window will be displayed.
04. Press the [F5] (DO IT) key.
The MPC2500 will create the AUTO LOAD folder in
the ROOT folder and save all the data in that folder.
If the ROOT folder already has the AUTOLOAD
folder, the Autoload Folder Exists window will be
displayed.
To replace the current AUTO LOAD folder with a
new one, press the [F2] (REPLAC) key. In this case,
the contents of the current AUTOLOAD folder will
be deleted.
To keep the current AUTOLOAD folder, press the
[F4] (CANCEL) key to cancel the operation, go to
the Directory folder and change the name of the cur-
rent AUTOLOAD folder.
Saving data to the internal
hard disk (option)
You can save data to the internal hard disk drive (option) as
well as the memory card, if the internal hard disk is installed
to the MPC2500. When you save the data to the internal
hard disk, select HARD DISK, instead of MEMORY CARD,
in the Save to field as in procedure “02” Saving data. The
other procedure is sama as Saving the data to memory card.
… 116 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info