630577
75
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
65
[F4] (RETRY) :
This will return to the Sample Edit
window without keeping the new
sample.
[F5] (Keep) : Allows you to save the new
sample. You can also name the
sample in the New name field.
Silencing a range selected
from a sample (SILENCE)
01. Adjust the start/end points.
Set the range you wish to silence with the start/
end point.
02. Press the [F6] (EDIT) key.
The Sample Edit window will be displayed.
03. In the Edit field, select SILENCE.
04. Press the [F5] (DO IT) key
The Keep or Retry window will be displayed.
New name field :
Enter a name for the new sample.
[F2] (PLAY) :
You can audition the new sample.
[F3] (OVER W) :
You can delete the original
sample and keep the new sample.
The sample name remains.
[F4] (RETRY) :
This returns to the Sample Edit
window without keeping the
new sample.
[F5] (Keep) : Allows you to save the new
sample. You can also name the
Sample In the New name field.
Saving part of a sample as a
new sample (EXTRACT)
You can extract the part of the sample set with the start/
end points, as a new sample. For example, you can extract
the snare sounds from the recorded drum loop and save it
as a new sample to use it separately.
01. Adjust the start/end points.
Set the desired part with the start and end points.
02. Press the [F6] (EDIT) key.
The Sample Edit windows will be displayed.
03. In the Edit field, select EXTRACT.
04.
In the New name field, set the name for the new sample.
05. Press the [F5] (DO IT) key.
The part between the start/end points will be saved
as a new sample.
Sample window features
Pressing the [WINDOW] key in the sample field bring up
the Sample window. In the Sample window, you can make
several settings for the selected sample.
Changing the sample name
01. In the Sample field in the TRIM page, select a sample
that you wish to change the name of.
02. Press the [WINDOW] key.
The Sample windows will open.
03. In the Sample name field, enter the new name.
For more information for setting the name, see the
“Setting names” section on Page 10.
04. Press [F4] (CLOSE) key
It closes the window and goes back to TRIM page.
Changing the pitch of a sample
In the Tune field, you can set the sample’s pitch. The 2
digits in the left is semitones, the 2 digits in the right is
cents (100 cents = 1 semitone). You can change the pitch
in the PROGRAM mode as well. The changes you
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info