630577

Akai MPC2500 Manual

73
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
63
Chapter 12 : Editing a sample
Setting the start / end points for the sample
The start/end points sets the part of the sample data, which will actually be played back. The recorded sample may have an
unnecessary part at the beginning, which may make it more difficult to place the sound in the correct spot timing when
hitting the pad. You can fix this problem by adjusting the start point. You can also adjust both the start and end points to play
only a part of the phrase. If the sample has empty parts at the end, which consumes unnecessary memory, you can delete the
empty parts by adjusting the end point and using the edit feature.
Start/end points are displayed in sample points. The sample point is the minimum unit used for sample editing. The MPC2500
has the 44100 sample points per second.
About the waveform display
The TRIM page displays the waveform of the sample selected in the Sample field.
It displays the waveform of the whole sample, with
the parts set by start/end points highlighted. If you
select a stereo sample, you can select the channel
(LEFT/RIGHT) to display in the View field.
Adjusting the start point
01. Press the [MODE] key and then the [PAD 6] (TRIM).
When you press the [MODE] key, its LED will blink. Press the [PAD 6] while the [MODE] key’s LED is blinking to
display the TRIM page.
02. Select the Sample field and select a sample you wish to edit.
The Sample field is located in the upper left corner of the screen, which displays the sample name. It displays the
waveform of the selected sample.
03. Select the St (start) field and adjust the start point.
You can change the start point by turning the DATA wheel.
If you press the left/right cursor key while holding the [SHIFT] key, you can select the digit with the DATA wheel.
You can also enter the value directly with using the numeric keys.
04. Hit the pad to check the start point.
When you hit the pad, the MPC2500 plays the sample. The playback method varies depending on the pad.
If you hit the [PAD 14] (PLAY TO), the MPC2500 will play the sample before the start point.
If you hit the [PAD 15] (PLAY FROM), the MPC2500 will play the sample from the start point.
If you hit the [PAD 16] (PLAY ALL), the MPC2500 will play the whole sample regardless of the start/end point settings.
If you hit any pad from the [PAD 1] to [PAD 12], the MPC2500 will play from the start point to the end point.
Adjusting the end point
05. Select the End field and adjust the end point.
You can change the end point by turning the DATA wheel.
If you press the left/right cursor key while holding the [SHIFT] key, you can select the digit with the DATA wheel.
You can also enter the value directly with using the numeric keys.
In this section, you will learn about the TRIM mode, where you can set the sample’s start/end points, or the loop.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info