630577

Akai MPC2500 Manual

25
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
15
04. In the Erase field, select NOTE ONLY.
Note field will open up.
05. Select the Note field.
If you wish to delete all events, leave it as ALL.. To
delete only events on a specific pad, hit the pad to
delete. You can select several pads. If you hit a dif-
ferent pad by mistake, you can cancel the selection
by hitting the pad again. To restart the pad selec-
tion, turn the DATA wheel to the left. The value in
the Note field will be reset to ALL so that you can
select pad from the beginning.
06. Press [F5] (DO IT) key.
The operation starts and the events of the selected
pad within the selected area will be deleted.
Tips: When you delete events with the Erase field set to ALL
EVENT, the MPC2500 will delete other events in the selected
area as well as pad events. When you delete events with the Erase
field set to EXCEPT Note, the MPC2500 will delete the other
events other than the pad events in the selected area.
Timing correct feature
When recording a pad performance, it is hard to play the
pads to the tempo. By using the timing correct feature,
you can correct the timing of the pad event you recorded
by hitting pads. There are two ways to use this feature:
by correcting the timing in real time during the record-
ing, and by correcting the recorded event after the re-
cording.
• Real time timing correction
You can correct the timing real-time during the recording.
01. When a sequence is stop, press [F1] (T.C.) key in the
MAIN page.
The Timing Correct window will open up.
02. In the Note value field, set the value for timing cor-
rection.
For example, if you set “1/16”, each position of the
performance data will be moved to the nearest 1/16
note.
You can set the Note values as follows.
1/8 = 1/8 note, 1/8(3) = 1/8 note triplets, 1/16 =
1/16 note, 1/16(3) = 1/16 note triplets,
1/32 = 1/32 note, 1/32(3) = 1/32 note triplets,
OFF = NO timing correction.
• Swing feature
You can set the swing value in the Swing% field.
With the swing feature, the even numbered events
set in the Note value field will be off the rhythm
according to the value in the Swing% field. With
this feature you can create the shuffle groove.
03. Press [F4] (CLOSE) key.
It closes the window.
Note: If you press [F5] (FIX) key, the MPC2500 will correct the
timing of the recorded data.
Tips: If you press [F1] (T.C.) key during recording/playback, a
small Timing Correct window will be displayed while you are
holding the key. You can use the Note value field of this window
to change the value for timing correction. It makes it easier to
change the value during the recording.
• Correcting the timing of recorded events
You can correct the timing of recorded events.
01. When a sequence is stop, press [F1] (T.C.) key in the
MAIN page.
Timing Correct window will open up.
02.
In the Note value field, set the value for timing correction.
For example, if you set “1/16”, each position of the per-
formance data will be gridded to the nearest 1/16 note.
You can set the Note values as follows:
1/8 = 1/8 note, 1/8(3) = 1/8 note triplets, 1/16 = 1/16
note, 1/16(3) = 1/16 note triplets, 1/32 = 1/32 note,
1/32(3) = 1/32 note triplets, OFF = NO timing correction.
• Swing feature
You can set the swing value in the Swing% field.
With the swing feature, the even numbered events
set in the Note value field will be off the rhythm
according to the value in the Swing% field. With
this feature you can create the shuffle groove.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info