630577
27
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
17
Note repeat feature
If you press a pad while holding the [NOTE REPEAT]
key, the pad sound will be played repeatedly accord-
ing to the value of the timing correct until you release
the pad. You can also control its velocity by changing
the strength used to press the pad. With the Note re-
peat feature, you can record a difficult phrase to record
in real time, such as 16 beat hi hat, snare roll, etc…
01.
Press the [NOTE REPEAT] key during recording / playback.
02. While holding the [NOTE REPEAT] key, press the
pad to play repeatedly.
The pad’s sound will be played repeatedly accord-
ing to the value of the timing correct until you re-
lease the pad. You can also control its velocity by
changing the strength to press the pad.
While holding down the [NOTE REPEAT] key, the
bottom of display is changed as below. You can
change the Timing correct value directly with press-
ing the [F1] through [F6] key.
The selected Timing correct value is highlighted.
• Note Repeat Hold
You can also lock the “Note Repeat” feature by hold-
ing down the [NOTE REPEAT] key and then press-
ing the [SHIFT] key (or by holding down the
[SHIFT] key and then pressing the [NOTE REPEAT]
key). Pressing the [NOTE REPEAT] key again will
unlock the “Note Repeat” feature.
Punch In/Punch Out feature
You can start the recording in the middle of the sequence
during the playback (“Punch In”).
You can also stop the recording in the middle of the
sequence and resume the playback (“Punch Out”). This
is useful when you re-record the part of the recorded
sequence.
Punch In
Press the [PLAY], or the [PLAY START] key to play
back a sequence. At the point where you wish to start
the recording, press the [REC] key while holding the
[PLAY] key. The MPC2500 will start the recording.
If you press the [OVER DUB] key and the [PLAY]
key instead, the MPC2500 will start the over dubbing.
Punch Out
If you press the [REC], or the [OVER DUB] key dur-
ing the recording/overdubbing, the MPC2500 will stop
the recording/overdubbing and resume the playback.
Auto Locate feature
The [GO TO] key is used to move to a specific position
within a sequence. You can memorize up to three lo-
cate points.
• Saving a Locate point
01. In the MAIN page, press the [GO TO] key while the
sequence is stopped.
The Locate window will open up.
In the Go to field, the now time in the MAIN page
is displayed. You can enter the locate point you wish
to save by using the numeric keys or the DATA
wheel.
02. Move the cursor to either Locate1 – Locate 3 field
and press the [F2] (CAPTUR) key.
• Locating to a saved Locate point
01. In the MAIN page, press the [GO TO] key while the
sequence is stopped.
The Locate window will open up.
02. Move the cursor to either Locate 1 – Locate 3 field
and press the [F5] (GO TO) key.
The Now Time instantly change to the saved Lo-
cate point.
Tips: You can use the Auto Locate feature in both the MAIN
page and in the STEP/GRID mode.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info