630577

Akai MPC2500 Manual

24
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
14
Chapter 3: Sequence feature
Playing back a sequence
You can play back a recorded sequence by pressing the
[PLAY START] key. The sequence will be played repeatedly
until you press the [STOP] key. If you press the [PLAY] key
again, the MPC2500 will resume the playback from where
the previous play back was stopped.
Repeat play back of a sequence
You can play back several sequences in a series by us-
ing the Next Sequence feature. The Next Sequence fea-
ture allows you to select the next sequence to play, dur-
ing playing back a sequence, so that you can play the
sequences in a series.
01. In the Sq field in the MAIN page, select the sequence
you wish to play first.
02. Press the [PLAY START] key to start the play back of
the sequence.
03. Select the Sq field during play back, and select the
next sequence to play.
Selecting a sequence in the Sq field during the play-
back brings up the Next field, where you can select
the next sequence.
After playing back the currently selected sequence
to the end, the MPC2500 will start playing back the
sequence you select in the Next field. By repeating
this step, you can play back several sequences con-
tinuously.
Tips: With the [NEXT SEQ] key, you can select the next se-
quence with a pad. For more information, see the “Selecting a
sequence with pads” section on page 48.
Tips: In the SONG mode, you can set the order to play sequences.
For more information, see the “SONG mode” section on page 42.
Other useful features for
recording sequences
Undo Sequence feature
When overdubbing sequences, you can cancel the last
recording and reset to the setting before the recording.
01. During overdubbing, press the [STOP] key to stop
the overdub and press the [UNDO] key.
The LED of the [UNDO] key will be off and only the
last added recording will be deleted. To restore the re-
cording, press the [UNDO] key again to light the LED.
Note:
You can use the [UNDO] key only for the last recording.
Erase feature
You can delete a certain pad performance by using the
[ERASE] key. There are two ways to use this feature:
by deleting real-time during overdub, and by selecting
a pad and part to delete in the ERASE window when
overdub is stopped.
• Deleting in real time
01. Press the [PLAY START] key while holding the [OVER
DUB] key to start overdub.
02. Hold the pad you wish to delete while holding the
[ERASE] key.
From the performance data being recorded, only the
section from where you press the [ERASE] key and
pad and you release them will be deleted. By press-
ing the pad at the right timing, you can delete the
performance data at a certain timing in the phrase.
• Deleting in the Erase window
Performance data will be recorded in a track as an event.
In the Erase window, you can select specific events in a
track to delete.
01. Press the [STOP] key to stop a sequence.
02. Press the [ERASE] key.
The Erase window will open up.
The Tr field displays the number and the name of
the selected track. To delete all the events of the
track, select “Tr:00- ALL TRACKS” by turning the
DATA wheel to the left.
03. In the Time field, specify the area to delete events.
You will select the start and end point of the area in
the Time field. For example, to delete only the event
in the first bar from 2-bar sequence, set “001.01.00 -
002.01.00”. In this case, the event at 002.01.00 point
will not be deleted.
If you set the end point “002.01.00” like this, the
area right before the end point will be included in
the area.
002.01.00
001.04.95001.04.94 002.01.01001.04.93
EVENT EVENT EVENT EVENT EVENT
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info