630573
16
Zoom out
Zoom in
Previous page
1/170
Next page
4
Chapter 1: Outline of the DPS12
mw [CURSOR] key
The cursor key is used to move the cursor (highlighted part) on the display to select an item to set.
GO TO
LOCATE
MEMORY
MAIN
MIXER
X
IN
Z
ASSIGN
T
TRACK
VIEW
S
DISK
U
PROJECT
V
UNDO
W
EDIT
Y
OUT
&
TO
#
FROM
SPACE
EDIT POINT PLAY
MASTER
nt
mx
my
mz
m{
nr
ns
mx Mode keys ([MAIN] key / [TRACK VIEW] key / [ASSIGN] key / [DISK] key / [PROJECT] key /
[MIXER] key / [EDIT] key)
These keys are used to switch among various operating modes (MAIN mode, TRACK VIEW mode,
MIXER mode, etc.). The [MAIN], [TRACK VIEW], and [MIXER] keys are effective even during the recording
or playback operation, while the other keys are effective only when the operation is stopped.
my [UNDO] key
This key is used to cancel the recording or editing operation you just performed. When you press this
key right after you perform recording or editing, the previous status is restored and the LED above the
[UNDO] key lights up (Undo). Pressing the [UNDO] key again restores the status obtained when you
performed the recording or editing operation, and the LED turns off (Redo).
TIP :
The range of the Undo level parameter (to set how many previous operations can be
restored via the
[UNDO]
key) is 0 to 250. If the Undo level is set to “2” or higher, press the
[UNDO]
key, then enter the number of possible undo operations.
mz Edit point keys ([IN] key / [OUT] key)
These keys are used to store IN/OUT points that are used to specify the range for the Auto Punch In/
Out function and Edit function.
m{ Edit play keys ([TO] key / [FROM] key)
These keys are used for the Edit Play function that plays back data from or to the current stop position.
nr Locate keys ([MEMORY] key / [GO TO] key)
These keys are used to store the locate point (the position information in a song) and move the current
position on the DPS12 to any locate point.
ns Transport buttons
These keys are used to control the transport operation of the DPS12, such as recording, playback,
stop, etc. Each button has the following function:
[REC] button ............ This button is used to record. Pressing the [ ] button while holding down the
[REC] button causes a track with its [RECORD SELECT] key on to enter recording
mode. Recording mode is also entered when you press the [REC] button while
holding down the [ ] button during playback (Punch In).
[ ] button ............. This button is used to play back data. Pressing this button during recording
cancels recording, and playback continues (Punch Out).
[ ] button ............. This button is used to stop recording, playback, fast forward, and rewind.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS12i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS12i in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info