630573
169
Zoom out
Zoom in
Previous page
1/170
Next page
157
Appendix
SW No.1 - 3: SCSI ID setting Default SCSI ID = 4
SW No.4: Terminator setting Terminator = ON
SW No. 1 2 3
SCSI ID=0 0 0 0
SCSI ID=1 0 0 1
SCSI ID=2 0 1 0
SCSI ID=3 0 1 1
SCSI ID=4 1 0 0 Default
SCSI ID=5 1 0 1
SCSI ID=6 1 1 0 DPS12i
SCSI ID=7 1 1 1
Default setting of DIP switches
SW No.12345678910
ON OFF OFF ON OFF ON OFF OFF OFF OFF
Hard Disk Installation
Install the disk drive by the following procedure.
1. Turn over the DPS12 and loosen the screws to remove the Bottom Cover.
2. Loosen the screw to remove the Drive Mounting Plate from the Bottom Cover.
3. Mount the disk drive to the Drive Mounting Plate. Use four inch-thread screws to fix the drive.
Note: When installing the fixed hard disk drive, remove the rubber cushions (including metal bushings) for
the removable disk drive on the Drive Mounting Plate.
4. Place the Drive Mounting Plate with the disk drive attached to the DPS12 and connect the 50P SCSI cable
and 4P power cable between the disk drive and MAIN PC board. With the wire tie-band, fix the cables with
the other cables conneced between the Power Supply and MAIN PC board.
Notes: When installing the fixed hard disk drive, bend the guide (chassis) towards the rear to clear the
drive space. When installing the removable disk drive, remove the drive cover on the front panel.
5. Place the Bottom Cover back. Fix the Drive Mounting Plate to the Bottom Cover and fix the Bottom Cover.
Use four 3 x 10 screws to fix the Drive Mounting Plate.
Note: If the screw heads for the drive hit the Bottom Cover, place the four metal washers between the
Drive Mounting Plate and Bottom Cover.
()
()
()
()
169


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS12i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS12i in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info