28962
69
Zoom out
Zoom in
Previous page
1/75
Next page
69
B-F-S (BATTERY FAIL SAFE)
Your RD6000 Super offers a Fail Safe function to warn you of a low voltage condition in your receiver’s battery pack.
This function is only operable when using the AIRTRONICS PCM receivers.
You first must select either PCM 1 or PCM 2 modulation. See page 24.
To activate the Battery Fail Safe program, select “etc” on the Channel indicator by using either the (CH –) or the
(CH +) keys. (Note that you must be on the STW screen to be able to move horizontally across the screen to “etc”.)
Press the FUNCTION down key to select the B-F-S (battery fail safe) screen.
Next, press the Inc +/YES key to change the B-F-S to “ACT”, indicating that the Battery Fail Safe function is now
active. (pressing either the INC +/YES or the DEC -/NO key will toggle the function between “INH” and “ACT”
settings.)
When the B-F-S is set to “ACT”, the PCM receiver will monitor the receiver pack voltage to warn you when it reaches
the target level, approximately 4.7 volts. When the airborne battery is at this point, the throttle servo will move to a
low throttle position for one second, and then return to normal. This cycling of the throttle servo will occur about once
each minute until you land and recharge the NiCd battery pack. IT IS RECOMMENDED THAT YOU LAND IMMEDI-
ATELY if the receiver fail safe warns you of low voltage conditions!
Press the END key to return to the STW screen.
BASIC MENU
By default the BASIC aircraft and helicopter programming menu are on. Basic programming gives you the basic
features included in the RD6000 Super. By turning BASIC OFF, you are turning on the ADVANCED aircraft or
helicopter programming menu.
To turn BASIC OFF, press the CH+ key until you reach “etc” in the CH area on the main screen. Now press the
FUNCTION down key untill you reach the BASIC ON screen. Press the YES or NO key to turn on the Advanced
programming menu. Press the END key 2 times to return to the main screen.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info