28962

Airtronics RD6000super Manual

66
Zoom out
Zoom in
Previous page
1/75
Next page
66
OPTION MENU SCREEN
In the advanced programming you have the ability to turn off unused programming screens with the OPTION MENU
SCREEN. This is vary useful and vary conveneant when one of your models only requires some features. For
example one aircraft is used as a triainer and you do not need to use any C-MIX, CROW, AI-DIF, DELTA, V-TAIL, you
can go to the OPT screen and turn them off so they will not display in the normal programming screens. If you deside
you later that you want to use a feature you have turned off, you can at anytime use the OPT to turn the feature back
on.
NOTE 1: Turning off the feature only removes it from the programming screen only. I will not however turn off the
feature. Example, you had activated your FLAPE for Flaperons and then in the OPT screen you turned
FLAPE off. Your Flaperons will still be active but you will not see the FLAPE screen in the programming
menu.
NOTE 2: This feature is best used on a aircraft or helicopter after you have setup your “need on all the time” features.
For example the swash plate type for a helicopter, ones you select the swash plate type you can then turn the
swash plate type screen off because you have no adjustments in that screen and by turning the screen off
you will not mistakenly change the swash plate type.
Before turning off any unused feature screens, make sure they are at there default setting or do not have any affect on
any control surface.
Use the CH+ key to move to the etc in the CH area of the main screen. Next use the FUNCTION down key until you
reach the OPT screen. Now press the YES key, the OPT will now flash 3 times. Now you can use the FUNCTION
down key to view all the feature screens that can be turned off. Turning the feature on or off is done by using the YES
or NO keys. After selecting YES or NO, you can now press the END key to exit out of the OPT screen. Press END 3
times will bring you to the main screen.
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info