521963
19
Zoom out
Zoom in
Previous page
1/47
Next page
offered by Busse-Yachtshop.com
AIR 403 Land Manual Document #0049 REV D
SOUTHWEST WINDPOWER 8/20/2001 19
3.3 Hub And Rotor Assembly
Before assembling the hub and rotor refer to Figure 7 below, and the following detailed
instructions.
NOTE: To avoid damage to the blades during installation, do not put the blade assembly on
the turbine until the turbine is mounted on the tower.
Figure 7
3.3.1 Mounting the Blades
CAUTION: THE EDGES OF THE ROTOR BLADES ARE SHARP. PLEASE
HANDLE WITH CARE.
Notice that the screw holes in the blades are counter-bored for the socket head cap screws.
Place one of the blades with the counter bore facing up, and align the screw holes. Insert
one of the socket head cap screws through the blades and hub. Place a nut on the end of
the screw and tighten the screw with the 3/16” hex key wrench to 10 – 12 foot lbs. (13.6 –
16.3 Nm). Repeat this procedure on all three blades.
NOTE: You may need to “thread” the screws through the hub with the hex wrench.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Air Marine Air 403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Air Marine Air 403 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info