560624
35
Zoom out
Zoom in
Previous page
1/78
Next page
35
line and the needle finds itself on the left-hand side.
3 Turn the flywheel and let the needle come out of the material, set the button for choice of
pattern to B. After you have stitched both sides 5 or 6 times on both sides, you stop when
the needle is on the right-hand side.
4 Turn the flywheel and let the needle come out of the material, then set the button to C. The
needle is located on the right-hand side. Then stitch the right-hand side of the buttonhole.
5 Turn the flywheel, see to it that the needle leaves the material and then set the button to B.
The needle is located on the left-hand side. After you have stitched both sides 5 or 6 times
on both sides, you stop when the needle is on the right-hand side. (illustration 40)
Sewing zippers
1 Attach the zipper foot to the pressure foot as is described on page 29. (illustration 41)
2 Pin or tack the zipper to the material and then place it in the right position under the
pressure foot.
3 Then sew the zipper into the article of clothing. (illustration 42)
Hemming
1 Place the hemming foot on the machine as described on page 29.
2 Fold the material about 3mm from the edge and place it under the hemming
foot.(illustration 43)
3 Fold the material during sewing and guide it in the hemming foot.
4 See to it that the material under the right half of the foot does not move.
Guide the material properly through the foot as is shown in the picture.(illustration 44)
Sewing on buttons
1 Place the button foot as is described on page 29.
2 Tack or pin the button on to the spot you have marked. (illustration 50)
3 Adjust the machine to the correct stitch width (stitch selection button 3-7).
4 Test whether the needle falls into each hole, if necessary adjust the stitch width.
(illustration 51)
5 Let the foot drop.
6 Then sew the button on. (illustration 52)
Sewing of (blind) hems
Pressure foot Choice of pattern Stitch length
Blind hemming foot "I" 1 – 3
Pressure foot Choice of pattern Stitch length
Button foot "C" ~ "G" 0
Pressure foot Choice of pattern Stitch length
Hemming foot "A" 1 - 4
Pressure foot Choice of pattern Stitch length
Zipper foot "A" 1 - 4
English
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aigger HSM5657A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aigger HSM5657A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info