560624

Aigger HSM5657A Manual

31
Zoom out
Zoom in
Previous page
1/78
Next page
31
2 Then pull the upper thread until you see the bobbin thread come up.
3 Pull both the top and the bobbin thread backwards 15cm, as is shown in picture 3.
Straight stitch and zigzag stitch
1 Turn the wheel until the needle is in its highest position and lift the pressure foot up.
2 While holding the threads with your left hand, you turn the wheel towards yourself to get
the needle in the material at the right spot. Here you begin to sew.
3 Sew a number of stitches backwards by keeping the button for "sewing backwards"
depressed.
4 Stop the machine and turn the wheel to bring the needle down into the material. Lift the
pressure foot up.(illustration 34)
5 Turn the material around the needle to get the desired direction. (illustration 35)
6 Lower the pressure foot and continue sewing.
7 To remove the material, you bring the needle to the highest position, you lift the pressure
foot up and pull the material away from you.
8 Use the thread cutter at the back of the pressure foot holder, as is shown in the picture.
(illustration 36)
9 Leave about 15cm of yarn length on the work.
Tricot stitch
Place the material under the pressure foot so that there is a narrow edge on the right hand side
of the pressure foot. Guide it so that the stitches fall on the edge of the material.
(illustration 37)
Forked stitch
With this manner of sewing, seams are elastic and materials can be joined together firmly. Use
the forked stitch for example for sewing bathing suits and as a decorative stitch.
Smock stitch (illustration 45, 46 & 47)
The decorative stitch achieved by stitching or embroidering over pleats is called the “smock
stitch”. This allows you to embellish the front of blouses or cuffs. The smock stitch will give the
material more texture and elasticity.
Pressure foot Choice of pattern Stitch length
Zigzag foot "H" "ss"
Pressure foot Choice of pattern Stitch length
Zigzag foot "ss"
Pressure foot Choice of pattern Stitch length
Zigzag foot "H"( ) 0.3~4
Pressure foot Choice of pattern Stitch length
Zigzag foot "A" ~ "J" 0.3 ~ 4
English
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aigger HSM5657A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aigger HSM5657A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info