534691
17
Zoom out
Zoom in
Previous page
1/43
Next page
Afinia H-Series 3D Printer User’s Manual
17
TIP: An empty Afinia Premium spool weighs about 280 grams. If you are installing a partially used
Afinia Premium filament spool, weigh it, and subtract 280 grams from the weight. Enter that
value into the material Weight text box.
Status
This area displays the current temperature of the nozzle and platform and if either element is
currently being heated.
Nozzle & Platform Position Controls
The five buttons (FL, FR, Center, NL, NR) control the position of the nozzle and the platform.
The nozzle moves to the left and right; the platform moves forward and backward.
The To button controls the height of the platform, and is used in the nozzle height calibration
procedure described on page 13.
The Bottom button returns the platform to the lowest position.
Set Nozzle Height
Takes whatever value you have in the To box and saves it as the Nozzle height to use during
printing.
Stop All
Stops heating and all the movement of the printer. Once you click this button, the current model
being printed is cancelled. You CANNOT resume a print job once the printer has been stopped.
After you use the Stop All function, you will need to re-initialize the printer.
Pause Print
This button allows you to pause a print in mid-progress while allowing you to resume the print job
where it left off. This is very useful if, for example, you want to change the material color mid-print.
Another use for pausing a job mid-print is to allow fasteners to be inserted into printed cavities and
then printed over to lock the fastener into place.
This option is only available when the printer is actively printing and above the first four printed
layers.
Table Heat 1 hr
Click the Table Heat 1 hr button to heat the table to 105º C for a full hour.
Heating the platform will not take the full hour, but the longer the platform heats, the more the outer
edges of the platform will be heated. For prints extending close to the edge of the platform, this
will help prevent warping of the model during printing.
Note: You should always preheat the platform prior to printing to ensure the best results.
Stop Preheat (Windows) / Stop Heat (Mac)
This button will halt any heating of the table, either the 1 hour heat or the 15 minute preheat from
the 3D Print menu. This option only appears when the table in actively being heated by one of
these two operations.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Afinia H-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info