Manual Afinia H-Series (page 15 of 43) (English)

534691

Zoom out

Zoom in

1/43

Afinia H-Series 3D Printer User’s Manual

Raise the platform again until the platform is just touching the nozzle. If the current height is

lower than the previous point when the platform and nozzle first contact each other, use this point

as the reference.

Repeat these steps for each of the 9 points on the platform. Once you have determined the

highest point on the platform, move back to that point and adjust the platform position so the

nozzle is again just touching the platform. Click the Set nozzle height button to change the

nozzle height setting to that shown.

Once the nozzle height is set, use the 9 buttons to

move to each position. Select the distance from

the drop-down to the right of the selected position,

choosing the value that will bring the platform into

contact with the nozzle.

Perform this step with each of the nine positions.

If you are using clips to secure the print surface to

the platform, be careful to position the clips so they

do not interfere with the nozzle or wind barrier.

Once all 9 values have been entered, click the

Apply current values button.

If you need to perform this function again, click the

Reset button to clear all values.

Click the Quit button when you are finished.

The adjustments in the example above, for instance, indicate that the print surface is warped, with

the center higher than both the front and back edges. Using the Platform Level Calibration utility,

you can correct for this warping.

This process is not intended to replace manually leveling the platform. It should only be

used if your print surface itself cannot be leveled due to warping or an inconsistent

thickness.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Afinia H-Series Manual

Product: