534691
16
Zoom out
Zoom in
Previous page
1/43
Next page
Afinia H-Series 3D Printer User’s Manual
16
Loading the Print Material Filament
This process will be the same on both Mac and
Windows.
A. Launch the Afinia H-Series 3D Software (refer
to the software install procedure if you have
not already installed it), and select
Maintenance from the 3D Print menu. Click
the Extrude button. After the printer nozzle
has warmed up to 260° C, the printer will beep;
you can also monitor the nozzle temperature in
the Maintenance window under the 3D Print
menu.
B. Be sure the filament is running
through the filament tube between
the spool holder and extruder!
C. Once the nozzle is heated, push the end
of the filament into the hole at the top of
the extruder head and hold it there with
gentle pressure until the extruder motor
starts pulling it through the extrusion
head. The extruder will extrude a thin
filament of material for a short period of
time.
Other Maintenance Options
The Extrude button is used to load material into the nozzle. Click this button, and the nozzle will
begin to heat. When the temperature is high enough (260° C), the material is squeezed out of the
nozzle. The system beeps before material starts extruding, and it beeps again when finished.
When changing the material (see page 29), use this function to load the new material to the nozzle.
It can also be used to test whether the nozzle is working correctly.
Use the Withdraw button to clear the filament from the nozzle when you change the filament or if
the nozzle needs to be cleaned. Once the nozzle is up to temperature (260°C) and the printer
beeps, gently pull out the material.
The New Spool button is used by the software to keep track of how much material has been used,
and warn you if you don’t have enough material left to print your model.
Click the button and enter the grams of material you have on the current spool. If it is a new spool,
the weight should be set to the filament weight of the spool in grams. You can also specify
whether the material you are printing with is ABS or PLA.
Mac version
Windows version
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Afinia H-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info