782361
64
Zoom out
Zoom in
Previous page
1/136
Next page
58
SCOOPY+ S - User Manual
POTS Parameters
This sub-menu is only visible on units with the POTS option.
Notes:
Dialing Mode: tones are used by default (DTMF), but for specific cases (old PBXs, etc.) it is
possible to select pulse dialling.
Dial Tone: choose "Wait" so that the codec waits for the dial tone before dialing the
numbers. The dial tone may be specific with some particular equipment or networks, and may
not be detected by the SCOOPY+ S; in such case, disable this function ("Ignore"), and the codec
will dial the numbers just after picking up the line. This latter choice also works correctly with
most modern PBXs.
Country Code: this choice will set the internal modem for the characteristics applicable in the
selected country. The full list is not shown above as it is quite large! For a country not found in
the list, usually it is possible to select a country with similar standards (such information may be
found from local specialists).
Max Speed: in nominal use, the POTS codec runs at 24000 bit/s, but it can automatically adapt
according to the line quality, and change the bit rate if required at the beginning and during the
link. With this setting, you can constrain the bit rate to a lower value. Reason for this: on a line
featuring a variable quality1 you can avoid undesirable changes during the communication by
"limiting" the modem to a speed that you know to be stable. The speed may nonetheless go
down further if the quality decreases too much.
Speed Mode: for a line/transmission with variable quality, and/or to avoid repeated changes
of the bit rate, with this setting you can force a fixed bit rate. In such case, the "Max Speed"
above setting becomes a fixed value. Be aware you must be sure that transmission conditions
will not require a lower speed; otherwise you incur a synchronization loss in such eventuality.
1 This can happen for example when the line suffers a strong crosstalk from neighboring lines.
POTS Parameters
Di a ling Mode
Tone
Pulse
Di a l Tone
Wait
Ignore
Country Code
Argentina
United States
Max Speed
12 kbit/s
24 kbit/s
Speed Mode
Auto
Fixe
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info