782361
66
Zoom out
Zoom in
Previous page
1/136
Next page
60
SCOOPY+ S - User Manual
PIN Save: if this option is checked, the unit saves the PIN code and unlocks the SIM card
automatically when the unit is switched on.
It is recommended to disable this feature before changing for another SIM card (and possibly
another PIN). However, the unit will not make more than one trial if the memorized code is
wrong.
Mode: select the desired transmission mode: "IP Mode" for transmission of data packets (IP
protocol), or "Cellphone" for the telephone mode, which can also be wide band "HD Voice"
when all conditions are met (see above in 2.1.4, Mobile voice mode HD Voice).
Note: the telephone mode is not available for a "mobile key" device on the USB interface,
because such devices only support IP data transmission.
Network Quality: select here the expected quality of the transmission via the mobile
interface in IP mode. This is the same type of setting as for the Ethernet interface (see above in
52, Ethernet Parameters), but a different value can be set here for the transmission via a
mobile network (typically a lower quality can be expected).
Data Active: activate or disable the mobile data service. This is necessary for using the mobile
IP mode (but useless for the mobile voice mode). This is similar in function to connecting an
Ethernet cable on a wired network: by activating the connection the unit is linked to the
Internet and it can send and receive IP data. For instance it can receive an incoming call. It can
also initiate an outgoing call.
Note: once this parameter is "checked", it is memorized: the data connection is carried out
automatically by the SCOOPY+ S at startup, when it registers on the mobile network.
Why disabling the data service? For avoiding unwanted data consumption. For instance, if you
only intend to use the voice / HD voice service, mobile data are useless.
Preferred Techno: select the network technology. "Auto" is the normal choice, which
provides operation on 4G/LTE as long as the conditions allow it, but fallback to 3G/3G+ or
GSM/2G if the radio link is too poor (or for dealing with a telephone link, not supported on the
LTE network). It is also possible to force a specific technology xG ("Only xG" selection), or
exclude the LTE mode ("Only 2G, 3G" choice).
Note: if you force the LTE mode it is not possible to perform a voice/HD voice telephone link.
Network Operator: normally the unit automatically selects a suitable network. If you want to
force a specific operator (which can happen when using the unit abroad), this menu presents
the list of available network so you can manually select one. But not all networks are actually
allowed, this depends on the policy of the SIM card’s provider!
Access Point: this sub-menu allows to enter the necessary parameters for data connections
(IP mode): APN, user name and password. The essential setting is the APN (Access Point
Name), mandatory for accessing the mobile IP network. SCOOPY+ S automatically sets the APN
for many operators, but you may have to enter this yourself, or change the default setting. The
other parameters can usually stay empty; otherwise they must be provided by the network
operator, along with the SIM card and the APN.
Auth. Type: type of authentication to be used for the data service connection. The default
setting PAP fits most use cases.
Network Status: information on the mobile network (for the current connection):
network/operator identification, technology (GSM, EDGE, UMTS, HSDPA, HSPA, LTE, etc.), radio
signal strength. Note: bars on the home screen also show the mobile reception level.
Hardware: information on the mobile access module (type, firmware, IMEI) and about the SIM
card (IMSI, subscriber number).
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info