782361
27
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOPY+ S - User Manual
21
In mono operation, each input can be routed to the main program and/or the possible coordination line.
In stereo mode, the input can be routed to left, right, or both.
Input 3 can also be configured as "Sound Guide": in this case it is not included in the program mix
(neither the coordination mix), but instead it is routed to the left ear of the headphone outputs, mixed
with the other sources selected for monitoring.
2.3.2. Line outputs
The SCOOPY+ S has two line level outputs with the following charcteristics:
Balanced outputs, 3-pin male XLR (located on the right panel)
Maximum level adjustable from -11 to +22 dBu
The signals on the outputs can be selected among:
"Send": Left/Right mixing bus, or in mono mode Program/Coordination
"Receive": remote signals received through the link (Left/Right, or Program/Coordination in
mono mode)
"Mix": send/receive mix (the balance is the same as for headphone output 2)
2.3.3. Headphone outputs: monitoring
The SCOOPY+ S has two outputs for listening on headphones, with following features:
6.35 mm (1/4") jack (on left and right sides)
Volume setting with dedicated knobs
Ability to monitor a mix of the "Send" and "Receive" signals; on each headphone the
send/receive balance is adjusted thanks to a potentiometer on the front panel, combined with
the volume knob.
When operating in mono with a coordination channel (mobile voice), various monitoring modes are
available for listening to the program and/or the coordination. This configuration is detailed further
(2.3.6, "Mixing and routing", and Table 4 Operation of the monitoring matrix).
2.3.4. USB interface (device)
This interface (mini-B socket on the rear panel) is a USB device port which provides the capability to set
a link with a Windows or macOS computer. The SCOOPY+ S is seen by the computer as a stereo sound
card.
In the "Play" direction (output) from the computer, the two audio channels received by the SCOOPY+ S on
its USB interface are injected into the Program mixing bus (see below, 2.3.6 and "Figure 3 Main mixing
and network sends").
In the direction towards the computer, the Program mixing bus is fed to the channels of the USB
interface (see below, 2.3.6 and Figure 3).
The USB audio interface cannot be used along with the record/playback function to/from an SD card
(see further).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info