782361
28
Zoom out
Zoom in
Previous page
1/136
Next page
22
SCOOPY+ S - User Manual
2.3.5. Recording/Playing audio files
This feature is optional on the SCOOPY+ S.
In mono operation, the SCOOPY+ S can record onto an SD card the mono "programme" signal. When
transmitting, the Program feedback is also recorded on a second track. The recordings have following
characteristics:
Linear 16 bits coding, regardless of the transmission coding format.
48 kHz sampling frequency (except if the recording is started while transmitting and encoding
at 32 kHz).
WAV file format: mono for an "offline" recording (without a network link at the time the
recording is started), 2-channel ("stereo") if the recording is started when a transmission is
already active. This format allows post-processing the files on all types of editing software.
Recording is not possible when operating in stereo mode.
A recording stored on the SD card can be played back by the SCOOPY+ S; in such case (in mono operation)
it becomes one more source mixed on the "Program" bus. The two audio signals played back are
injected on the mixing bus.
On demand, the SCOOPY+ S can send a recording to an FTP server.
The record/playback feature cannot be used along with the USB audio interface (see above).
A simple editing function is available: on a given recording, you can set a "begin" marker and an "end"
marker. This defines a virtual "take" that can be played like a "real" recording, but playing only the part
between the markers.
Several takes can be defined from the same recording.
It is possible to convert a virtual take into a real WAV file; this file will then add to the library of
recordings.
2.3.6. Mixing and routing
The audio sources are mixed for generating:
The program and coordination send signals.
The line outputs.
The output to the USB device port or the signal recorded on the SD card.
The headphone monitoring outputs.
The available sources are:
The mic/line inputs (MIC1 to MIC3).
The inputs from the USB device port or a file played from the SD card (SD PB).
The Program and Coordination feedback signals received from the network link.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info