782361
25
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOPY+ S - User Manual
19
2.2.10. OPUS coding
Application mono or stereo music, low capacity transmission channels. Moderate latency.
Opus is an open source coding algorithm (under BSD license), described by RFC6716 from the IETF. Like
MPEG coding algorithms, it is a wide band audio codec, but it features distinctive characteristics:
Low latency; the algorithmic delay of Opus is very low compared to MPEG coding (Layer 2, AAC,
HE-AAC...).
Adaptability: Opus features many parameters influencing its performance, but it is possible to
adapt them automatically depending on the external constraints and the signal characteristics.
In the SCOOPY+ S, the configuration stays very simple: the user just imposes the audio channel
format (mono/stereo) and the desired bit rate, and the codec automatically adjusts the other
parameters (for instance the audio bandwidth).
Capacity to apply changes "on the fly": the coding allows changing its operation parameters on
the fly, with no interruption and no artefacts when switching. In this way the bit rate can be
changed during the link on the SCOOPY+ S, without any audio noise or dropout.
In addition, when the remote device is another AETA codec, it will automatically apply the same
bit rate change to the stream it is transmitting.
Opus coding is only available for IP networks, wired or mobile.
You can adjust the bit rate during a link using the "CONNECTION PARAMETERS" frame of the "CONNECTIONS"
web page, or using the joystick on the front panel.
Note: the quality indicators on the front panel or the "Status" page of the web interface provide
information in real time about the transmission quality (for the transmit direction, this depends on the
capability of the remote codec).
2.2.11. Linear coding
Application mono or stereo music, transmission media with very high capacity and reliability.
The linear coding is in fact the absence of coding/compression, the audio data are transmitted without
information loss and with no bit rate reduction. Obviously this implies a very high bit rate; therefore
linear coding is only usable over an IP network, and with a very high bandwidth and a very good quality
of service, such as a local area network or a high reliability private WAN.
The coding features three variations L16, L20 and L24, corresponding respectively to a sample resolution
of 16 bits, 20 bits, or 24 bits for the transmitted audio. With each variation it is possible to select a
sampling frequency of 32 or 48 kHz, and a mono or stereo channel mode.
The linear coding is only available for IP networks.
It is not recommended on mobile IP networks due to the required bit rate and the poor quality of
service expected from a mobile network.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info