587610

Aermec MODUCONTROL Manual

60
Zoom out
Zoom in
Previous page
1/184
Next page
60
EN
IMDCFJ. 12.05 6343841_03
Power dedicated to domestic water production
Index - String
MIN
value
MAX
value
Parameter function
0 % 100 %
In those units that can produce domestic water, once this function has been activated it is possible to
decide the percentage of power to use for the production. This function allows you to set a threshold to
guarantee reduced energy consumption during domestic water production.
Standby time in Input/Output
Index - String
MIN
value
MAX
value
Parameter function
0 s 600 s
This parameter allows you to establish the standby time (in seconds) for reversing the 3-way valve
inserted in the system for producing domestic water.
Standby time in Input/Output
Index - String
MIN
value
MAX
value
Parameter function
03
This parameter enables the possibility to join the ID digital clamp (marked on the electric card enclosed
with the unit as TRA) with a room thermostat on which the functioning of the compressors and supple-
mentary electric heaters will be disabled.
Remember also that setting this parameter with a value of:
• 1 or 2, you ENABLE this function
• 0 or 3, you DISABLE this function
Remember that the OPEN status of the clamp means:
• the function blocks the compressors and electric heaters if the parameter is set at 1
• the function blocks the compressors, pump and electric heaters if the parameter is set at 2
• the pump alarm (as in the previous software version), if the parameter is set at 3
Remember also that by setting this parameter at 3, the moducontrol card is compatible with the previ-
ous software version (3.6).
Enabling flow switch bypass
Index - String
MIN
value
MAX
value
Parameter function
01
In those units that produce domestic water, the flow switch alarm can be bypassed to allow the correct
synchronisation between a diverting valve installed in the system, and unit functioning during the pro-
duction of hot domestic water.
Time for flow switch bypass
Index - String
MIN
value
MAX
value
Parameter function
0 s 300 s
This parameter allows you to establish the time (in seconds) for flow switch bypass.
Parameters only visible in model set for
hot water production
Parameters only visible in models set for
hot domestic water production
Parameters only visible in the models with DCP installed
Parameters only visible in bicompressor models
Parameters only visible in the models with inverter compressor
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aermec MODUCONTROL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aermec MODUCONTROL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info