Manual Aermec MODUCONTROL (page 57 of 184) (English, German, French, Italian, Spanish)

587610

Zoom out

Zoom in

1/184

IMDCFJ. 12.05 6343841_03

Fig.9 Fig.10

PASSWORD = 030

Setting of input and output regulation

Index - String

MIN

value

MAX

value

Parameter function

The machine adjustment will depend on the value of this parameter:

• if 0, the machine adjustment is based on the output temperature;

• if 1, the machine adjustment is based on the input temperature;

• if 2, the machine adjustment is based on the temperature of the remote probe, as read on the DHW

panel (in the event of a fault on the remote probe, the machine adjustment is based on the built-in

probe, signalling this fact via alarm code 157).

If the production of hot domestic water is activated, the adjustment is automatically forced on the water

output temperature, regardless of the value of this parameter.

Setting cooling FORCE-OFF

Index - String

MIN

value

MAX

value

Parameter function

-25 °C 25 °C

The units check the working temperature (input or output), to which a safety threshold is connected,

and beyond which the compressor is switched off immediately and automatically; this threshold is cal-

led FORCE-OFF.

WARNING The following parameters

must only be modiﬁ ed by qualiﬁ ed

personnel authorised to install the

unit.

Parameters only visible in heat pump models

Parameters only visible in models set for

hot domestic water productio

Parameters only visible in the models with DCP installed

Parameters only visible in bicompressor models

Parameters only visible in the models with inverter compressor

To access the INSTALLER menu, press

the key in (Fig.9). Once the key has been

pressed, you must insert the password

to access the various menus; to access

the user menu, the password is 030.

To modify the value of the passwords,

use the arrow keys. When you have in-

serted the correct password, press the

key in (Fig.9). The monitor will show the

index of the INSTALLER parameter and

a 3-character string that identiﬁ es it; the

string will be displayed for one second,

after which it is replaced by the value

of the parameter itself. To move on to

the next parameter, use the arrow keys

(Fig.10). To modify a parameter, just se-

lect it, press the key in (Fig.9), modify

the assigned value using the arrow keys

in (Fig.10), and conﬁ rm the modiﬁ cation

by pressing the key in (Fig.9) again.

INSTALLER menu

Setting operational parameters (installer level)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aermec MODUCONTROL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aermec MODUCONTROL Manual

Product: